Fluke
Fluke Pro3000 Analog Tone & Probe Kit FLK-26000900
Traces wires on inactive networks up to 10 miles with SmartTone pair identification and a loud speaker for hearing through enclosures
- SmartTone technology identifies the correct wire pair by changing tone cadence
- Loud speaker lets you hear the tone through drywall and wood enclosures
- Tone signal travels up to 10 miles on most cables for long-distance tracing
- Angled bed-of-nails clips and rugged RJ11 plug give direct access to phone and data jacks
- Continuity testing and line polarity confirmation verify cable integrity quickly
Pro3000 Analog Tone & Probe Kit
The Fluke Pro3000 kit is built for electricians and low-voltage technicians who must trace and identify wires on non-active networks. It combines a tone generator and an inductive probe to locate cables behind drywall, wood, or other enclosures without stripping insulation. The system targets professionals working on telephone and data infrastructure where pair verification is required daily.
SmartTone Pair Identification
SmartTone technology changes the tone cadence when the far end of a cable pair is shorted, giving audible confirmation of the correct pair. The generator provides five distinct tones so technicians can isolate individual pairs in multi-pair cables without guesswork. This function replaces trial-and-error tracing and reduces time spent on fault finding in telephone and data wiring jobs.
Angled Clips and Loud Speaker
The line cord uses angled bed-of-nails clips and a ruggedised RJ11 plug for direct access to phone and data jacks without extra adapters. A large speaker on the probe amplifies the tone so it can be heard through barriers, while the generator can send a signal up to 10 miles on most cables. Continuity testing and line polarity confirmation are built into the handset for basic circuit checks.
Highlights
- SmartTone technology identifies the correct wire pair by changing tone cadence
- Loud speaker lets you hear the tone through drywall and wood enclosures
- Tone signal travels up to 10 miles on most cables for long-distance tracing
- Angled bed-of-nails clips and rugged RJ11 plug give direct access to phone and data jacks
- Continuity testing and line polarity confirmation verify cable integrity quickly
Specifications
No published specifications for this item yet.
Questions about this item
How often will I need to replace the batteries in the Pro3000 tone generator and probe?
The kit runs on standard user-replaceable batteries; swap them when the tone volume drops or the continuity LED dims.
What distance limit stops the tone from being heard through the probe on a long cable run?
The generator can send a detectable tone up to 10 miles on most cables; beyond that the signal fades below the probe's pickup threshold.
How loud does the probe's speaker get when I'm tracing wires inside walls all day?
The large speaker is designed to be heard through drywall and wood, so it stays clearly audible in typical indoor environments without causing fatigue.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
