We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver hand-operated pressure pump with fine-adjustment knob and 1/8 FNPT output fitting

Fluke

Fluke 700PMP Hand Pressure Pump 150 psi 1000 kPa measurement tool

SKU CH-NAKN-8N912

Generates pressures up to 150 psi and 1000 kPa with a 1/8 FNPT output fitting for Fluke 700 and 717 series modules

  • Generates pressure up to 150 psi for calibration
  • Delivers 1000 kPa output for high-range testing
  • Compatible with Fluke 700 series pressure modules
  • Works with Fluke 717 series calibrators
  • Features 1/8 FNPT output fitting for secure connections

Target Users

The Fluke 700PMP hand pressure pump generates pressures up to 150 psi or 1000 kPa for calibrating 700 series pressure modules and 717 series calibrators. Technicians performing field verification or bench calibration of pressure instruments will find it suitable. It is not intended for applications requiring pressures above the stated range or for automated high-volume testing.

Build and Connections

The pump body includes a multi-turn vernier that allows fine pressure adjustment during calibration procedures. An output fitting with 1/8 FNPT threads provides a standard connection point for test hoses or modules. The manual operation requires no external power source, making it portable for on-site work.

Critical Specification

The functional pressure range spans 0 to 145 psig, equivalent to 0 to 10 bar, which determines the maximum calibration point achievable. Selecting this pump is appropriate only when the device under test falls within that range. Higher-pressure instruments will require a different pressure source.

Highlights

  • Generates pressure up to 150 psi for calibration
  • Delivers 1000 kPa output for high-range testing
  • Compatible with Fluke 700 series pressure modules
  • Works with Fluke 717 series calibrators
  • Features 1/8 FNPT output fitting for secure connections

Specifications

No published specifications for this item yet.

Questions about this item

What pressure range does the 700PMP hand pump actually deliver for calibration?

The pump generates 0 to 145 psig (0 to 10 bar), with a maximum rated pressure of 150 psi or 1000 kPa.

Which thread does the 1/8 FNPT output fitting on the 700PMP accept?

The output uses a 1/8 inch female NPT thread, compatible with Fluke 700 series modules and 717 series calibrators.

How is the 700PMP hand pump set up for a calibration test?

Connect the module or calibrator to the 1/8 FNPT port, then use the multi-turn vernier to increase pressure gradually while watching the reference display.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.