We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Shallow well jet pump system with pressure tank, beige finish, horizontal motor mount, pressure gauge and fittings visible

Flint & Walling

Flint & Walling EK05SAT25H Shallow Well Jet Pump System 1/2 hp 115/230V AC

SKU CH-6K6K-RKDE9

Shallow well jet pump system with 1/2 hp motor, 115/230V AC, 8.5 gal tank, 25 ft max suction lift, and 8.4 gpm flow at 30 PSI

  • 1/2 hp motor delivers up to 8.4 gpm at 30 psi
  • Dual-voltage 115/230V AC suits standard household wiring
  • 5 gal tank with 28 psi bladder stores water between cycles
  • 25 ft maximum suction lift handles shallow well depths
  • 60 psi shut-off pressure protects system from over-pressurisation

Shallow Well Jet Pump System

The Flint & Walling EK05SAT25H is a complete shallow well jet pump system designed for residential water supply. It operates on dual voltage 115/230V AC and delivers a 1/2 hp motor for reliable performance. The unit includes an 8.5 gal tank with a 28 psi bladder pressure for consistent pressure regulation.

Replaces Deeper Well Or Lower Capacity Units

This system suits installations where the water source sits within 25 ft of the pump, offering a practical upgrade from hand pumps or smaller jet pumps. The jump is worth it when you need steady flow at household pressure, with shut off at 60 psi and rated flows of 8.4 gpm at 30 psi, 5.2 gpm at 40 psi, and 3.3 gpm at 50 psi measured at 10 ft lift.

Fits Standard Plumbing With Compact Footprint

The pump connects via 1-1/4 in NPT inlet and 3/4 in NPT discharge, matching common residential piping. Its overall dimensions of 23 1/4 length, 14 width, and 28 1/2 height allow placement in tight utility spaces. The integrated tank frees up separate tank mounting and simplifies installation for shallow well applications.

Highlights

  • 1/2 hp motor delivers up to 8.4 gpm at 30 psi
  • Dual-voltage 115/230V AC suits standard household wiring
  • 5 gal tank with 28 psi bladder stores water between cycles
  • 25 ft maximum suction lift handles shallow well depths
  • 60 psi shut-off pressure protects system from over-pressurisation

Specifications

BrandFLINT & WALLING

Questions about this item

What clearance does the 23 1/4 in length, 14 in width and 28 1/2 in height require for mounting?

The pump system measures 23 1/4 in long, 14 in wide and 28 1/2 in high, so allow at least that footprint plus room for the 1-1/4 in NPT inlet and 3/4 in NPT discharge connections.

How do I wire the dual-voltage motor and what step is often missed?

Connect the motor for either 115 V AC at 8.6 A or 230 V AC at 4.3 A, then set the internal voltage selector to match — forgetting to move the selector is the common error.

When should the 8.5 gal tank bladder be checked or replaced?

Check the bladder pressure annually; it should read 28 psi when the system is off and drained, and replace the tank if pressure cannot be held or the bladder ruptures.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.