Flexzilla Garden Lead-in Hose 5/8" x 5' Female/Female 3/4" - 11 1/2 GHT Fittings Yellow 12 Pack
A 12-pack of five-foot lead-in hoses with female-to-female fittings that stay flexible in all weather and resist kinking under pressure
- Pipe Size2"
- Length5 feet
- Standards/CertificationsFDA Class VI Seats
- Inside Diameter0.62 inches
- Outside Diameter0.62 inches
- End ConnectionsNPT
- Extreme all-weather flexibility resists abrasion and UV
- Female-to-female fittings connect easily to hose reels
- Wont kink under pressure during use
- Lightweight hybrid polymer lays flat with no memory
- Anodized aircraft aluminum ends with O-ring prevent leaks
Flexzilla 5/8" Lead-In Hose 12-Pack
This twelve-pack supplies five-foot lead-in hoses built from a flexible hybrid polymer that stays pliable in hot and cold conditions. Each hose carries a 150 PSI working-pressure rating and uses anodized aircraft-aluminium female-to-female garden-hose-thread fittings. The bright yellow cover resists abrasion and UV exposure for long outdoor life. Builders and landscapers can stock multiple reels or job sites with a single purchase.
Thermals Noise and Power Draw
The hybrid-polymer tube lays flat with no memory and will not kink under normal supply pressure, so water flows without restriction or vibration. An internal O-ring in each fitting creates a leak-free seal that holds at the rated 150 PSI without weeping. No pump or external power is required, so the assembly adds zero electrical draw and produces no operating noise. The lightweight construction reduces handling fatigue during layout and retrieval.
5/8" Inside Diameter Female GHT Fittings
The 0.62-inch bore matches standard five-eighths-inch garden-hose plumbing, while the 3/4-inch GHT female threads connect directly to reel outlets, timers or sprinkler heads without adapters. Buyers who need male-thread ends, a different length or a larger inside diameter for high-volume irrigation should select another model. The FDA Class VI seat rating confirms material suitability for potable-water contact where local codes allow.
Highlights
- Extreme all-weather flexibility resists abrasion and UV
- Female-to-female fittings connect easily to hose reels
- Wont kink under pressure during use
- Lightweight hybrid polymer lays flat with no memory
- Anodized aircraft aluminum ends with O-ring prevent leaks
Specifications
| Pipe Size | 2" |
|---|---|
| Length | 5 feet |
| Standards/Certifications | FDA Class VI Seats |
| Inside Diameter | 0.62 inches |
| Outside Diameter | 0.62 inches |
| End Connections | NPT |
| Fractional Size | 0.62 inches |
| Color/Finish | Yellow |
| Working Pressure | 150 pounds_per_square_inch |
| Brand | Baldwin |
| Item Count | 12 pack |
| Selling Unit | Set |
| Parts | 1 Year |
| Labor | 1 Year |
| Part Number | HFZG505YWLI-E |
Questions about this item
How do I install the female-to-female 3/4-inch GHT fittings on this 5-foot lead-in hose without cross-threading?
Hand-tighten each anodized aircraft aluminum fitting onto the hose reel and supply threads until the O-ring seats, then give a quarter-turn with pliers; the hybrid polymer stays flexible so the hose won't twist during tightening.
What maintenance will the Flexible Hybrid Polymer hose and its O-rings need over time?
Inspect the O-rings each season for cracking and wipe the yellow cover clean of grit; the FDA Class VI seats and reinforced mid-layer resist UV and abrasion, so no lubrication or periodic tightening is required.
At what pressure or temperature limit does the hose show stress first during sustained use?
The working pressure ceiling is 150 PSI; exceeding that rating will stress the reinforced mid-layer and O-ring seal before the polymer cover or aluminum ends show any deformation.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Taylor Made 12" x 18" Jolly Roger Novelty Flag 1818 marine electronic
- Accessories



