FKM DT-530 Yellow Infrared Thermometer Gun -50°C to 530°C
Measures -50 °C to 530 °C in 0.5 seconds with adjustable emissivity 0.1-0.99 and 12:1 distance-to-spot ratio
- TypeFKM-DT-530-Yellow(Containing battery)
- ColorYellow
- Accurate surface readings with adjustable emissivity from 0.1 to 0.99
- Results in 0.5 seconds without touching hot or hazardous surfaces
- Covers frozen food to pizza ovens from -50 °C to 530 °C
- Backlit LCD with auto-hold, °F/°C switch and 15-second auto-off
- Targets a precise spot with 12:1 distance-to-spot ratio and single laser
Infrared Thermometer for Surfaces -50°C to 530°C
The FKM DT-530 yellow infrared thermometer gun measures surface temperatures from -50°C to 530°C without contact. It is built for cooks, automotive technicians and HVAC workers who need fast readings on grills, engines or ductwork. It is not for human or animal temperature checks.
Yellow Housing with Single Laser and 12:1 Ratio
The bright yellow body holds a single-point laser and a 12:1 distance-to-spot ratio for targeting. A backlit LCD protects eyes in low light and the unit powers down after 15 seconds of inactivity. Two AAA batteries are included so it works straight out of the box.
Adjustable Emissivity 0.1 to 0.99
Press and hold the MODE key for three seconds to set emissivity between 0.1 and 0.99, matching the surface material for accurate infrared measurement. This single setting decides whether the thermometer suits the specific surfaces you work with.
Highlights
- Accurate surface readings with adjustable emissivity from 0.1 to 0.99
- Results in 0.5 seconds without touching hot or hazardous surfaces
- Covers frozen food to pizza ovens from -50 °C to 530 °C
- Backlit LCD with auto-hold, °F/°C switch and 15-second auto-off
- Targets a precise spot with 12:1 distance-to-spot ratio and single laser
Specifications
| Type | FKM-DT-530-Yellow(Containing battery) |
|---|---|
| Color | Yellow |
Questions about this item
What is the distance-to-spot ratio and how does it limit the measurement area?
The 12:1 ratio means the measured spot grows 1 cm for every 12 cm of distance, so at 60 cm the sensor reads a 5 cm circle.
What physical size and power source does the gun need to operate?
It fits in one hand and runs on two AAA batteries that are included in the box.
How do I set the emissivity for a shiny metal pan, and what mistake should I avoid?
Hold the MODE key for three seconds, then adjust the value between 0.1 and 0.99 to match the surface; the common error is leaving the default setting on reflective materials.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



