We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White CPVC electric drum pump with motor housing and discharge tube

Finish Thompson

Finish Thompson DTTC013 Drum Pump 115VAC 1/4 HP 60Hz 10 GPM

SKU CH-FKAA-1SZSC

Electric drum pump transfers chemicals at up to 10 GPM with CPVC and PTFE wetted parts for corrosion resistance

  • 10 GPM flow rate moves liquid quickly
  • 115 VAC single-phase power plugs into standard outlets
  • 1/4 HP totally enclosed fan-cooled motor resists dust and moisture
  • CPVC, PTFE and Alloy 625 wetted parts handle aggressive chemicals
  • 32 psi maximum pressure suits low-head transfer tasks

Application and Purpose

The Finish Thompson DTTC013 is an electric drum pump built for chemical transfer tasks. It operates on 115VAC single-phase power at 60 Hz with a 1/4 HP motor. The wetted materials are CPVC, PTFE and Alloy 625 for broad fluid compatibility. It suits industrial maintenance crews and processing plants that move corrosive or viscous liquids from standard drums.

Sustained Flow Behaviour

The motor uses a totally enclosed fan-cooled enclosure to maintain output during extended runs. Rated flow reaches 10 GPM for water and 7 GPM for oil at the outlet. Maximum pressure is 4.32 psi and the pump handles fluids up to 400 CPS viscosity. The 1.6 inch inlet and 1 inch barb outlet keep throughput steady without frequent priming interruptions.

Thermal and Power Profile

The AC motor draws standard 115VAC household current without special wiring. Fan cooling dissipates heat so the housing stays within safe limits during continuous duty. Noise remains at typical industrial electric-motor levels. Power consumption matches the 1/4 HP rating, so no oversized circuit is required for normal chemical transfer cycles.

Highlights

  • 10 GPM flow rate moves liquid quickly
  • 115 VAC single-phase power plugs into standard outlets
  • 1/4 HP totally enclosed fan-cooled motor resists dust and moisture
  • CPVC, PTFE and Alloy 625 wetted parts handle aggressive chemicals
  • 32 psi maximum pressure suits low-head transfer tasks

Specifications

BrandFINISH THOMPSON

Questions about this item

How loud and hot does the 1/4 HP motor get during continuous chemical transfer?

The totally enclosed fan-cooled motor is designed for sustained operation at 60 Hz without overheating.

What discharge hose and fittings must I already have to connect the 1-inch barb outlet?

You need PVC tubing with a 1-inch inner diameter and a 1-5/16-inch outer diameter to match the discharge tube outlet.

Will the CPVC housing and PTFE seals resist the same chemicals my older steel pump handled?

CPVC, PTFE and Alloy 625 wetted parts are rated for chemical transfer up to 400 CPS viscosity and 4.32 psi maximum pressure.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.