We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Roll of rust-coloured splicing tape on a three-inch plastic core

FindTape

FindTape SST-38M Silicone Splicing Tape 3.8 mil 2 in x 72 yds Rust

SKU CH-06AP-9FM56

Silicone adhesive splicing tape with 3.8 mil polyester backing, 2 in by 72 yds, resistant to chemicals and high heat

  • TypeTape
  • ColorBrown
  • Clean, strong splices with high-adhesion silicone system
  • Resists chemicals, acids, oils, solvents and water immersion
  • Bonds film to leader cards in automated photo processing
  • Masks powder-coat and metal-bond seams reliably
  • Splices siliconized paper, films and non-woven materials

Splicing tape for film and powder coating

FindTape SST-38M is a silicone adhesive splicing tape built for clean, strong bonds in photographic processing and industrial masking. The 3.8 mil polyester film backing carries a stable adhesive system that resists chemicals, acids, oils, solvents and water immersion. It bonds photographic film to leader cards in automated equipment and masks adhesive seams during metal bonding. A 3 inch plastic core supports the roll for converting use.

For labs and coaters needing chemical resistance

This tape suits photographic labs splicing siliconized paper, films or non-woven materials and powder coating operations masking parts. It also serves metal bonding processes where adhesive seams need protection. Buyers who want a general-purpose office tape or a low-adhesion masking tape for delicate surfaces should look at something else. The aggressive silicone adhesive is designed for permanent splicing and harsh chemical environments, not temporary holding.

Stable adhesion through prolonged chemical exposure

The adhesive system maintains its bond during extended immersion in photo processing chemicals, acids, oils and solvents without staining or breaking down. It resists aging effects that cause conventional tapes to fail under sustained load. The polyester carrier remains dimensionally stable throughout long powder coating cycles and converting runs. Performance stays consistent from the first splice to the end of the 72 yard roll.

Highlights

  • Clean, strong splices with high-adhesion silicone system
  • Resists chemicals, acids, oils, solvents and water immersion
  • Bonds film to leader cards in automated photo processing
  • Masks powder-coat and metal-bond seams reliably
  • Splices siliconized paper, films and non-woven materials

Specifications

TypeTape
ColorBrown

Questions about this item

What core diameter does this tape fit?

The roll is wound on a 3 inch diameter plastic core, so it fits any dispenser or holder that accepts a 3 inch core.

Can this splicing tape bond to the polyester (PET) film backing it uses?

Yes, the silicone adhesive is designed to splice siliconized papers, films and non-woven materials, so it adheres reliably to the same PET film carrier used on this roll.

How can I confirm the tape is performing correctly after applying it?

A proper bond will hold firmly without edge lift, show no staining or adhesive bleed after exposure to processing chemicals, oils, solvents or water immersion, and the splice will remain intact through automated equipment runs.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.