We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Glow-in-the-dark hazard tape roll, 2-inch wide, alternating lime-green and black chevron pattern, matte PVC finish

FindTape

FindTape GLW-HZ Glow in the Dark Egress Hazard Tape 2 in x 33 ft

SKU CH-MEGJ-Z33FK

Photoluminescent PVC hazard tape marks dangerous areas by day and glows green at night for 33 ft

  • TypeTape
  • ColorBlack/Luminescent Lime Green
  • Photoluminescent safety marking glows 11.8 millicandelas at five minutes
  • Permanent solvent acrylic adhesive delivers 213 ounces per inch on stainless steel
  • 15 mil thick photoluminescent PVC backing withstands heavy foot traffic
  • Recharges under natural or artificial light for repeated low-light visibility
  • 2 inch by 33 foot roll with 3 inch core covers long runs

Photoluminescent Egress Hazard Tape

This glow-in-the-dark marking tape uses photoluminescent PVC to highlight hazardous areas in both daylight and darkness. The alternating black and luminescent lime-green chevron pattern provides clear visual warnings for walkways, steps and dangerous zones. It is suited for facility managers and safety officers needing reliable low-light egress marking.

Self-Adhesive Backing for Most Surfaces

A solvent acrylic adhesive on a 3-inch core delivers 213 ounces per inch adhesion to stainless steel, allowing direct application to clean, non-porous substrates. The 15-mil total thickness adds durability without requiring mechanical fasteners. On porous materials such as wood, concrete or stone, the manufacturer recommends a surface primer before installation.

Sustained Visibility After Light Loss

The tape emits 11.8 millicandelas per square metre at five minutes, falling to 4.6 after 10 minutes and 1.6 after 20 minutes. It remains clearly visible to dark-adapted eyes in total darkness but does not match the brightness of a standard flashlight. Photoluminescent powders recharge under natural or artificial light and are non-radioactive with a long lifespan.

Highlights

  • Photoluminescent safety marking glows 11.8 millicandelas at five minutes
  • Permanent solvent acrylic adhesive delivers 213 ounces per inch on stainless steel
  • 15 mil thick photoluminescent PVC backing withstands heavy foot traffic
  • Recharges under natural or artificial light for repeated low-light visibility
  • 2 inch by 33 foot roll with 3 inch core covers long runs

Specifications

TypeTape
ColorBlack/Luminescent Lime Green

Questions about this item

How long does the glow stay visible after the lights go out?

The tape emits 11.8 millicandelas per square meter at five minutes, drops to 4.6 at ten minutes and remains at 1.6 after twenty minutes, still visible to dark-adjusted eyes.

Will the adhesive hold on concrete or wood without extra preparation?

The manufacturer recommends applying a surface primer first on porous substrates such as wood, concrete or stone for reliable adhesion.

What surface must be clean and ready before I unroll the tape?

The solvent acrylic adhesive bonds to most non-porous surfaces; porous materials need a primer coat before application.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.