We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small rectangular SFP+ module with duplex LC ports and metallic finish

Ficer Technology Co., Ltd

Ficer Technology Co., Ltd DWDM SFP+ 10G 80km Transceiver 1563.86nm-1528.77nm Commercial Temp

SKU CH-W99F-G4GZY

DWDM SFP+ transceiver delivers 10 Gbps over single-mode fiber up to 80 km using the 1528.77–1563.86 nm C-band grid with duplex LC connectors

  • Device TypeTransceiver
  • Fiber CableSingle-mode Optical Fiber
  • Ports10GBASE-ZR/ZW Ethernet
  • Transfer Rate10 Gbps
  • 10 Gbps multi-rate performance across 8.5 to 11.32 Gbps protocols
  • 80 km reach over single-mode fiber with DWDM C-band wavelengths
  • Hot-pluggable SFP+ MSA design compliant with SFF-8431 and SFF-8472
  • APD receiver plus cooled EML laser on 100 GHz ITU grid
  • TAA-compliant, made in Taiwan with custom coding for Cisco and Juniper

DWDM SFP+ 80 km transceiver

This DWDM SFP+ module delivers 10 Gbps over single-mode fibre at distances up to 80 km using the C-band wavelength window 1563.86 nm to 1528.77 nm. It suits network operators extending 10GBASE-ZR/ZW, 8 GFC, 10 GFC, OC-192/STM-64, CPRI or OTN links across metro or campus backbones. The duplex LC connector and hot-pluggable SFP+ form factor allow insertion without powering down the switch.

Multi-rate upgrade for legacy 10G links

The transceiver supports data rates from 8.5 Gbps to 11.32 Gbps, covering 8GFC, 10GFC, OC-192, CPRI options 7 and 8, and OTU2/OTU2e/OTU2f in a single module. It replaces fixed-rate optics when a spare must serve several protocols or when a link budget demands the 80 km reach of a cooled EML laser and APD receiver. Buyers who need shorter reach, lower cost or multimode fibre should select a different module.

Sustained 80 km operation with digital diagnostics

A cooled EML transmitter on the 100 GHz ITU grid and an APD receiver maintain link stability over the full 80 km span under continuous load. The 2-wire management interface compliant with SFF-8472 reports real-time temperature, voltage, bias current and optical power so operators can detect degradation before a failure occurs. Single 3.3 V supply simplifies power budgeting in dense chassis.

Highlights

  • 10 Gbps multi-rate performance across 8.5 to 11.32 Gbps protocols
  • 80 km reach over single-mode fiber with DWDM C-band wavelengths
  • Hot-pluggable SFP+ MSA design compliant with SFF-8431 and SFF-8472
  • APD receiver plus cooled EML laser on 100 GHz ITU grid
  • TAA-compliant, made in Taiwan with custom coding for Cisco and Juniper

Specifications

Device TypeTransceiver
Fiber CableSingle-mode Optical Fiber
Ports10GBASE-ZR/ZW Ethernet
Transfer Rate10 Gbps

Questions about this item

What fiber type and connector does the DWDM SFP+ 10G 80km transceiver require?

It requires single-mode fiber with a duplex LC connector for the 80km link distance.

How is the module installed and which coding step is often missed?

Insert the hot-pluggable SFP+ into a compliant cage; you must provide the host equipment brand and model so the correct vendor coding can be programmed before deployment.

What ongoing maintenance does the transceiver need?

No scheduled maintenance is required; keep the LC connectors clean and replace the module only if link errors appear or the 2-wire SFF-8472 diagnostics report a fault.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.