We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small rectangular SFP transceiver module with simplex LC port and side bail latch

Ficer Technology Co., Ltd

Ficer Technology Co., Ltd BIDI SFP Transceiver 1.25G 60km Tx1310nm/Rx1550nm

SKU CH-14Q1-57ETY

A 1.25 Gbps bidirectional SFP transceiver sending at 1310 nm and receiving at 1550 nm over 60 km of single-mode fibre with a simplex LC connector

  • Device TypeTransceiver
  • Fiber CableSingle-mode Optical Fiber
  • Ports1000BASE-BX-U
  • Transfer Rate1.25 Gbps
  • 25 Gbps bidirectional throughput over a single fibre strand
  • 60 km reach on single-mode fiber with 1310 nm Tx / 1550 nm Rx
  • Hot-pluggable SFP MSA form factor for zero-downtime swaps
  • DDM via SFF-8472 2-wire interface enables real-time link health
  • TAA-compliant, Taiwan-built module coded for Cisco, Juniper and open switches

Single-Mode BIDI SFP Transceiver

This bidirectional SFP transceiver operates at 1.25 Gbps over single-mode fibre using a 1310 nm transmitter and a 1550 nm receiver. It is built for network engineers extending Gigabit Ethernet or 1GFC links up to 60 km with a single strand of fibre. The module uses a simplex LC connector and draws power from a 3.3 V supply.

Upgrade from Shorter-Reach or Dual-Fibre Modules

Replacing a 2 km, 10 km, 20 km or 40 km BIDI module with this 60 km version adds reach without changing the host port or the fibre plant. The step up is worth it when existing links hit distance limits or when a dual-fibre pair must be consolidated onto one strand to free capacity for other services.

Check Host Coding and Temperature Range Before

The supplier programs each unit for the specific switch or router brand and model you provide, so confirm the exact host equipment and share it with the vendor. Verify that the operating environment stays within the commercial temperature range and that the SFP cage supports INF-8074i MSA and SFF-8472 diagnostics.

Highlights

  • 25 Gbps bidirectional throughput over a single fibre strand
  • 60 km reach on single-mode fiber with 1310 nm Tx / 1550 nm Rx
  • Hot-pluggable SFP MSA form factor for zero-downtime swaps
  • DDM via SFF-8472 2-wire interface enables real-time link health
  • TAA-compliant, Taiwan-built module coded for Cisco, Juniper and open switches

Specifications

Device TypeTransceiver
Fiber CableSingle-mode Optical Fiber
Ports1000BASE-BX-U
Transfer Rate1.25 Gbps

Questions about this item

What type of fiber cable and connector does the 60 km BIDI SFP require?

It uses single-mode fiber with a simplex LC connector for the 1310 nm transmit and 1550 nm receive wavelengths.

How is the module installed in a switch and what step is often missed?

Insert the hot-pluggable SFP into an SFP MSA slot; the step often missed is telling the supplier the exact host brand and model so the correct vendor coding is programmed before shipment.

What ongoing maintenance does the 1.25 Gbps transceiver need?

No scheduled maintenance is required; keep the LC port dust caps on when unplugged and clean the ferrule with a lint-free wipe if signal loss appears.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.