We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact SFP+ transceiver module with silver metal housing and a single LC fiber port

Ficer Technology Co., Ltd

Ficer Technology Co., Ltd 10G BIDI SFP+ Transceiver Tx1490nm Rx1550nm SMF 80km

SKU CH-6V84-T1E59

10 Gbps bidirectional SFP+ transceiver with 1490 nm transmitter, 1550 nm receiver and 80 km single-mode reach

  • Device TypeTransceiver
  • Fiber CableSingle-mode Optical Fiber
  • Ports10GBASE-BX Ethernet
  • Transfer Rate10 Gbps
  • Reach 80 km over single-mode fiber with Tx1490nm/Rx1550nm wavelengths
  • Multi-rate 8.5–11.32 Gbps supports 10G Ethernet, FC and CPRI links
  • Hot-pluggable SFP+ MSA design enables tool-free installation in compatible switches
  • Digital diagnostic monitoring via 2-wire interface provides real-time link health data
  • TAA-compliant Taiwanese manufacture with OEM coding for Cisco, Juniper and open platforms

10G BIDI SFP+ Transceiver

This transceiver delivers 10 Gbps bidirectional data transfer over a single strand of single-mode fibre. It uses Tx 1490 nm and Rx 1550 nm wavelengths to reach distances up to 80 km. The module complies with IEEE 802.3 ae 10GBASE Ethernet and SFF-8431 SFP+ MSA standards. It suits network operators extending 10G links across campus or metro spans.

SFP+ slot and single-mode fibre

The unit plugs into any standard SFP+ port that supports SFF-8431 coding and accepts a simplex LC connector. A single +3.3 V supply powers the module, while the 2-wire SFF-8472 interface enables diagnostic monitoring. Hot-pluggable operation allows insertion or removal without powering down the switch. It frees a second fibre strand and a second port compared with dual-fibre optics.

Low power and silent operation

With no moving parts, the transceiver runs silently in commercial-temperature environments. The EML laser transmitter and APD receiver maintain link integrity across the full 80 km reach. Power draw stays within the SFP+ MSA envelope for a single 3.3 V rail. It is not suited for builders who need industrial-temperature ratings or multimode fibre compatibility.

Highlights

  • Reach 80 km over single-mode fiber with Tx1490nm/Rx1550nm wavelengths
  • Multi-rate 8.5–11.32 Gbps supports 10G Ethernet, FC and CPRI links
  • Hot-pluggable SFP+ MSA design enables tool-free installation in compatible switches
  • Digital diagnostic monitoring via 2-wire interface provides real-time link health data
  • TAA-compliant Taiwanese manufacture with OEM coding for Cisco, Juniper and open platforms

Specifications

Device TypeTransceiver
Fiber CableSingle-mode Optical Fiber
Ports10GBASE-BX Ethernet
Transfer Rate10 Gbps

Questions about this item

What is the maximum link distance supported by the 1490nm transmitter on single-mode fiber?

The transceiver supports an 80km link distance over single-mode fiber using the 1490nm EML laser transmitter and APD receiver.

What is the power supply requirement and typical heat contribution when operating continuously?

It operates on a single +3.3V power supply and is compliant with the SFP+ MSA power class for low heat dissipation in dense switch ports.

What host equipment and fiber patch cord are required for this module to function?

You need an SFP+ port coded for Cisco, Juniper, or compatible open switches, plus a simplex LC single-mode patch cord for the bidirectional connection.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.