Festo
Festo VUVS-L25-P53U-MD-G14-F8-1B2 575534 Air Solenoid Valve electrician tool
A 5/3 pressurised solenoid valve with G1/4 ports, 1000 l/min flow and 24 V DC operation
- TypeTest Equipment
- Color/FinishRed
- Item Count1 pack
- Selling UnitBox
- Parts3 Years
- Labor1 Year
- Precise control with 14 ms on switching time
- Reliable operation across -10 °C to 60 °C ambient range
- High flow capacity at 1000 l/min nominal rate
- Flexible mounting in any orientation simplifies installation
- Certified safety with c UL us recognized approval
Pneumatic Solenoid Valve 5/3 Pressurised
The Festo VUVS-L25-P53U-MD-G14-F8-1B2 is a 5/3 pressurised piston gate valve designed for compressed-air systems. It operates on 24V DC with a 3.3 W coil and provides a standard nominal flow rate of 1000 l/min through G1/4 ports. The valve is certified c UL us Recognised and DNVGL approved for industrial automation tasks.
Upgrade From 3/2 or 5/2 Valves
This model replaces simpler 3/2 or 5/2 valves when an application requires a pressurised centre position to hold actuator pressure. The jump is worth it when you need overlap lap, non-reversible flow direction and internal pilot supply in a 26.5 mm valve size. Switching times of 14 ms on and 48 ms off support fast cycling at 100 % duty cycle.
Suits Panels Requiring 6.3 mm Nominal Width
The valve suits control panels that need a 6.3 mm nominal width and soft-sealing principle with a b-value of 0.4. It is not for systems requiring reversible flow or external pilot air supply. Buyers needing a different voltage, port size or exhaust function should look at other variants in the VUVS range.
Highlights
- Precise control with 14 ms on switching time
- Reliable operation across -10 °C to 60 °C ambient range
- High flow capacity at 1000 l/min nominal rate
- Flexible mounting in any orientation simplifies installation
- Certified safety with c UL us recognized approval
Specifications
| Brand | FESTO |
|---|---|
| Model | VUVS-L25-P53U-MD-G14-F8-1B2 575534 |
| Type | Test Equipment |
| Color/Finish | Red |
| Item Count | 1 pack |
| Selling Unit | Box |
| Parts | 3 Years |
| Labor | 1 Year |
Questions about this item
What thread size and valve width are needed to mount this G1/4 valve?
The valve uses a G1/4 pneumatic working port and has a valve size of 26.5 mm with a nominal width of 6.3 mm for manifold or panel mounting.
How is the 24 V DC coil wired and what voltage tolerance must be observed?
Connect the coil to a 24 V DC supply; permissible voltage fluctuations are +/- 10 % and the coil draws 3.3 W at nominal voltage.
Which seals or internal parts need replacement after extended use?
The soft-sealing piston gate valve uses overlap lap seals; no user-serviceable seal kit is specified, so the valve is typically replaced as a unit after wear.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
