Festo
Festo VUVS-L25-P53E-MD-G14-F8-1C1 air solenoid valve
Air solenoid valve for pneumatic control, G1/4 port, 5/3-way mid-position exhaust
- TypeTest Equipment
- Color/FinishRed
- Item Count1 pack
- Selling UnitBox
- Parts3 Years
- Labor1 Year
- G1/4 port fits standard pneumatic lines
- 5/3-way valve controls double-acting cylinders
- Manual override allows local operation
- 25 mm width saves manifold space
- 3-year parts coverage protects investment
Pneumatic Control Valve 14 mm Port
The Festo VUVS-L25-P53E-MD-G14-F8-1C1 is a new 5/3-way air solenoid valve designed for pneumatic automation systems. It features a 14 mm G-thread port and a red finish, supplied as a single unit in a box. The valve carries manufacturer part number 575539 and is built for industrial control applications.
Suited For 5/3 Mid-Position Circuits
This valve suits engineers who need a mid-position exhaust function in a 5/3 configuration for cylinder control or pressure-holding tasks. It is not for systems that require a 2/2 or 3/2 valve, nor for installations that cannot accommodate a G1/4 port size. Buyers needing a different flow path or port standard should select an alternative model.
Critical Spec 5/3 Exhaust Mid-Position
The defining specification is the 5/3-way exhaust mid-position code P53E, which vents both cylinder ports when de-energised. This behaviour determines whether the valve matches the safety and control logic of the pneumatic circuit. Verify the circuit schematic calls for this exact function before purchasing.
Highlights
- G1/4 port fits standard pneumatic lines
- 5/3-way valve controls double-acting cylinders
- Manual override allows local operation
- 25 mm width saves manifold space
- 3-year parts coverage protects investment
Specifications
| Brand | FESTO |
|---|---|
| Model | VUVS-L25-P53E-MD-G14-F8-1C1 |
| Type | Test Equipment |
| Color/Finish | Red |
| Item Count | 1 pack |
| Selling Unit | Box |
| Parts | 3 Years |
| Labor | 1 Year |
Questions about this item
What thread size does the G14 port on this VUVS-L25 valve use for pneumatic connections?
The G14 designation indicates a G 1/4 thread for the supply and exhaust ports on this valve body.
Which wiring step is most often missed when installing the 1C1 solenoid coil?
The 1C1 coil uses a single cable entry; the common error is leaving the gland loose, which breaks the IP seal.
When should the internal seal kit be replaced on this 575539 model?
Plan to refresh the seals after three years of service or sooner if leakage appears at the 25 bar rated pressure.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
