Festo
Festo VUVG-B14-P53C-ZT-F-1P3 566518 air solenoid valve
Controls pneumatic flow with a 14 mm valve body, 53C function and F-1P3 coil in a red finish
- TypeTest Equipment
- Color/FinishRed
- Item Count1 pack
- Selling UnitBox
- Parts3 Years
- Labor1 Year
- Direct pneumatic control with 5/3 closed-centre function
- Compact 14 mm valve width fits tight manifolds
- Ready-to-install unit supplied in single pack
- Festo industrial-grade construction for long service life
- Identified by part number 566518 for easy reordering
Festo VUVG-B14 Air Solenoid Valve
The Festo VUVG-B14-P53C-ZT-F-1P3 is a pneumatic solenoid valve supplied new in a single pack. It is designed for electricians and automation technicians who need reliable air-flow control in test equipment or control-panel builds. The red finish aids visual identification in crowded cabinets.
Replacing worn or mismatched valves
This unit replaces failed or incorrectly specified solenoid valves in existing pneumatic circuits. The jump is worth it when the original valve leaks, sticks or cannot meet the required switching function, and the circuit calls for the exact 14 and 53 parameters stamped on the body.
Straightforward manifold mounting
Installation consists of bolting the valve to a standard manifold or sub-base and connecting the electrical plug. The most common issue is misaligned gaskets or incorrect port orientation, which causes cross-leakage; verifying the pilot-pressure supply and wiring polarity before pressurising avoids rework.
Highlights
- Direct pneumatic control with 5/3 closed-centre function
- Compact 14 mm valve width fits tight manifolds
- Ready-to-install unit supplied in single pack
- Festo industrial-grade construction for long service life
- Identified by part number 566518 for easy reordering
Specifications
| Brand | FESTO |
|---|---|
| Model | VUVG-B14-P53C-ZT-F-1P3 |
| Type | Test Equipment |
| Color/Finish | Red |
| Item Count | 1 pack |
| Selling Unit | Box |
| Parts | 3 Years |
| Labor | 1 Year |
Questions about this item
What manifold or sub-base does the 14 mm wide VUVG-B14 valve mount onto?
The VUVG-B14-P53C-ZT-F-1P3 is designed for direct mounting on Festo VTSA/VTSA-F manifolds with 14 mm station width; the valve body includes the captive mounting screws and seal kit required for a leak-free fit.
How do I wire the 1P3 electrical connector during installation, and what is the common mistake?
Align the 3-pin M8 plug keyway, push straight in until the latch clicks, then torque the knurled nut by hand — do not use pliers, as over-tightening cracks the connector housing and causes intermittent signals.
Which wearable part of the VUVG-B14-P53C-ZT-F-1P3 will need replacement first in continuous duty?
The internal pilot-valve seal set is the primary wear component; Festo supplies a dedicated seal kit for the 14 mm series that restores original switching performance when response time begins to drift.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
