Festo
Festo VSVA-B-P53E-ZH-A2-2AC1 547205 110V AC 18mm 5/3 Solenoid Valve
A 5/3 exhausted solenoid valve with 18 mm width, 110 V AC coil, 450 l/min nominal flow and external pilot supply
- TypeTest Equipment
- Color/FinishRed
- Item Count1 pack
- Selling UnitBox
- Parts3 Years
- Labor1 Year
- Precise 5/3 exhaust control with overlap lap design
- 450 l/min standard flow at 18 mm compact size
- 110 V AC operation with LED status indication
- 100 % duty cycle for continuous industrial use
- Reversible flow direction with external pilot air supply
Festo 18 mm 5/3 Solenoid Valve
The Festo VSVA-B-P53E-ZH-A2-2AC1 is a pilot-controlled pneumatic valve with an 18 mm valve size and 5 mm nominal width. It operates on 110 V AC at 50/60 Hz with an initial power of 2.9 VA and holding power of 2.1 VA. The unit features a soft sealing principle, mechanical spring reset and non-detenting manual override. It is designed for compressed air per ISO 8573-1:2010 [7:4:4] and includes an LED signal status display.
Replaces 5/2 or 3/2 valves needing centre-exhaust
This 5/3 exhausted valve with overlap lap replaces simpler two-position valves when a safe middle position that exhausts both work ports is required. The jump is worth it for safety-critical circuits where cylinders must stop in a depressurised state during power loss or emergency stop. It is not for systems that only need basic on/off actuation or where a pressurised centre position is specified.
Limits of 110 V AC pilot interface
The valve requires a pilot pressure of 3 to 10 bar and an operating pressure range of -0.9 to 10 bar. Permissible voltage fluctuations are -15 % / +10 % from the nominal 110 V AC supply. Switching times are 18 ms on, 30 ms off and 20 ms changeover with a 100 % duty cycle. Flow rates reach 650 l/min on the valve, 500 l/min on individual sub-base and 450 l/min optimised for pneumatically concatenated flow. External pilot air supply is mandatory.
Highlights
- Precise 5/3 exhaust control with overlap lap design
- 450 l/min standard flow at 18 mm compact size
- 110 V AC operation with LED status indication
- 100 % duty cycle for continuous industrial use
- Reversible flow direction with external pilot air supply
Specifications
| Brand | FESTO |
|---|---|
| Model | VSVA-B-P53E-ZH-A2-2AC1 547205 |
| Type | Test Equipment |
| Color/Finish | Red |
| Item Count | 1 pack |
| Selling Unit | Box |
| Parts | 3 Years |
| Labor | 1 Year |
Questions about this item
What manifold or sub-base does the 18 mm VSVA valve mount to?
The 18 mm wide VSVA-B-P53E-ZH-A2-2AC1 fits standard 18 mm manifold sub-bases and can be mounted in any position.
How do I wire the 110 V AC coil and set the pilot supply correctly?
Connect 110 V AC (50/60 Hz) to the solenoid terminals; the coil draws 2.9 VA inrush and 2.1 VA holding. Pilot air must be supplied externally at 3–10 bar.
When should I replace the soft seals and what media condition is required?
Replace soft seals if leakage appears; the valve requires compressed air to ISO 8573-1:2010 [7:4:4] and continued oil lubrication once introduced.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
