Festo
Festo VSVA-B-P53C-ZH-A2-2AC1 547207 5/3 closed solenoid valve 18 mm 110V AC 450 l/min
A 5/3 closed solenoid valve with 450 l/min flow rate, 110V AC operation and 18 ms on switching time
- TypeTest Equipment
- Color/FinishRed
- Item Count1 pack
- Selling UnitBox
- Parts3 Years
- Labor1 Year
- 5/3 closed centre holds position reliably
- 450 l/min standard flow meets pneumatic demand
- 110 V AC coil integrates with mains control
- 18 ms on / 30 ms off enables fast cycling
- 18 mm width fits dense manifold layouts
Festo 5/3 Closed Solenoid Valve 18 mm 110V AC
This Festo VSVA-B-P53C-ZH-A2-2AC1 is a 5/3-way closed-centre solenoid valve with an 18 mm valve size and 110V AC actuation. It delivers a standard nominal flow rate of 450 l/min and operates within a pressure range of -0.9 bar to 10 bar. The piston gate design uses a mechanical spring reset and soft sealing principle for reliable switching.
Suits pneumatic systems needing closed-centre
The valve fits applications requiring a 5/3 closed function with external pilot air supply and reversible flow direction. It includes an LED signal status display and offers flow control options on the exhaust. Builders who need a 5/2 function, a different voltage coil, or internal pilot supply should select another model.
110V AC operating voltage defines compatibility
The coil is rated for 110V AC supply only; it will not operate on DC voltages or other AC levels. Pilot pressure must be maintained between 3 bar and 10 bar for correct actuation. Verify your control circuit matches this voltage before installation.
Highlights
- 5/3 closed centre holds position reliably
- 450 l/min standard flow meets pneumatic demand
- 110 V AC coil integrates with mains control
- 18 ms on / 30 ms off enables fast cycling
- 18 mm width fits dense manifold layouts
Specifications
| Brand | FESTO |
|---|---|
| Model | VSVA-B-P53C-ZH-A2-2AC1 547207 |
| Type | Test Equipment |
| Color/Finish | Red |
| Item Count | 1 pack |
| Selling Unit | Box |
| Parts | 3 Years |
| Labor | 1 Year |
Questions about this item
Does the box include the sub-base and mounting screws or must they be ordered separately?
The unit is sold as a single valve in a box; sub-bases and mounting hardware are separate accessories.
When should I choose the 450 l/min version instead of the 500 l/min or 650 l/min ratings?
Use the 450 l/min standard nominal flow rate for system sizing; the 500 l/min and 650 l/min figures apply only when mounted on an individual sub-base or measured at the valve port.
What does the 450 l/min rating mean once the valve is installed in a machine?
It is the standard nominal flow rate at 6 bar supply and 1 bar pressure drop, so actual flow will vary with operating pressure and piping.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
