Festo
Festo VSVA-B-M52-MZH-A1-1R2L 5/2 solenoid valve 26 mm 24 V DC
Controls pneumatic flow with 5/2 monostable operation at 24 V DC and up to 16 bar pressure
- TypeTest Equipment
- Color/FinishRed
- Item Count1 pack
- Selling UnitBox
- Parts3 Years
- Labor1 Year
- 5/2 monostable valve enables precise pneumatic control
- 26 mm width fits ISO 15407-1 sub-base installations
- 24 V DC operation suits standard industrial power supplies
- IP65 rating protects against dust and water jets
- Mechanical spring reset ensures reliable return position
Valve function and width
This 5/2 monostable solenoid valve measures 26 mm wide and conforms to ISO 15407-1. It suits pneumatic automation systems needing a compact, standardised valve. The piston gate design with soft sealing handles compressed air reliably. It mounts on individual sub-bases or via throttle plate.
Sustained pressure performance
Operating pressure ranges from -0.9 bar to 16 bar for continuous duty. Mechanical spring reset returns the spool consistently after each electrical pulse. IP65 protection keeps dust and water jets out during long runs. Soft sealing maintains low leakage over millions of cycles.
24 V DC operating voltage
The coil requires exactly 24 V DC to actuate. Nominal width is 9 mm with a 27 mm overall width dimension. Exhaust flow control is optional via the sub-base. Buyers needing AC voltage or a different pressure range must choose another model.
Highlights
- 5/2 monostable valve enables precise pneumatic control
- 26 mm width fits ISO 15407-1 sub-base installations
- 24 V DC operation suits standard industrial power supplies
- IP65 rating protects against dust and water jets
- Mechanical spring reset ensures reliable return position
Specifications
| Brand | FESTO |
|---|---|
| Model | VSVA-B-M52-MZH-A1-1R2L |
| Type | Test Equipment |
| Color/Finish | Red |
| Item Count | 1 pack |
| Selling Unit | Box |
| Parts | 3 Years |
| Labor | 1 Year |
Questions about this item
Does the 24 V DC coil run warm during continuous duty?
The valve is rated for continuous operation at 24 V DC with IP65 sealing; power draw is low so heat rise is minimal in normal use
What sub-base or manifold must I already have to mount this 26 mm ISO 15407-1 valve?
It fits any ISO 15407-1 size 26 mm sub-base or manifold with matching port pattern
Will the 9 mm nominal flow work with my existing 6 mm tubing and fittings?
The 9 mm nominal width provides higher flow than 6 mm tubing, so the tubing becomes the limiting factor — expect reduced flow compared to the valve’s full capacity
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
