Festo
Festo VSVA-B-M52-AZH-A1-1T1L 24V DC 1100 l/min 26 mm electrician tool
A 26 mm wide, 24 V DC solenoid valve delivering 1100 l/min flow with 25 ms on and 45 ms off switching times
- TypeTest Equipment
- Color/FinishRed
- Item Count1 pack
- Selling UnitBox
- Parts3 Years
- Labor1 Year
- 24 V DC coil with 1.6 W consumption for efficient pilot control
- 1100 l/min standard flow rate supports high-speed pneumatic circuits
- 25 ms on / 45 ms off switching times enable rapid cycling
- 26 mm compact width fits dense manifold layouts
- LED signal display gives immediate visual status confirmation
Festo 24V DC 5/2 Solenoid Valve
This Festo VSVA-B-M52-AZH-A1-1T1L is a 5/2 monostable air solenoid valve designed for pneumatic automation systems. It operates on 24V DC with a 1.6W coil and provides a standard nominal flow rate of 1100 l/min. The 26mm wide piston gate valve suits control cabinet or manifold mounting in any orientation. Electrical actuation with pilot control enables reliable switching for machine builders and maintenance engineers.
Thermals noise and power draw
The valve draws 1.6W at nominal 24V DC with permissible voltage fluctuations of +/-10%. A surge resistance of 2.5kV protects the coil during switching transients. Duty cycle is rated at 100% for continuous operation. An LED signal status display provides visual confirmation of the actuated state without audible noise from the electrical circuit.
Upgrade from slower or larger valves
This model replaces older 5/2 valves that require higher pilot pressure or offer lower flow rates. The 25ms on and 45ms off switching times reduce cycle duration compared to slower actuators. Optimised concatenated flow of 1100 l/min supports high-speed cylinders. The compact 26mm width fits where larger valves cannot, and the -5°C to 50°C ambient range covers most industrial environments.
Highlights
- 24 V DC coil with 1.6 W consumption for efficient pilot control
- 1100 l/min standard flow rate supports high-speed pneumatic circuits
- 25 ms on / 45 ms off switching times enable rapid cycling
- 26 mm compact width fits dense manifold layouts
- LED signal display gives immediate visual status confirmation
Specifications
| Brand | FESTO |
|---|---|
| Model | VSVA-B-M52-AZH-A1-1T1L 8033044 |
| Type | Test Equipment |
| Color/Finish | Red |
| Item Count | 1 pack |
| Selling Unit | Box |
| Parts | 3 Years |
| Labor | 1 Year |
Questions about this item
How do I mount the 26 mm valve and wire the 24 V DC coil without mis-polarising the LED?
Mount in any orientation; connect 24 V DC to the coil terminals observing the polarity marked on the body so the LED signal display lights correctly.
What ongoing maintenance does the 5/2 monostable valve need?
Use compressed air meeting ISO 8573-1:2010 [7:4:4] at 3–10 bar pilot pressure; the soft-seal piston gate design requires no routine lubrication.
At what point does the 100 % duty-cycle coil hit its thermal limit during continuous cycling?
The 1.6 W coil is rated for 100 % duty cycle at 24 V DC ±10 %; sustained operation stays within its thermal design without a separate cooling requirement.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
