Festo
Festo VSVA-B-M52-AZH-A1-1AC1 547118 24V AC 5/2 solenoid valve
5/2 monostable solenoid valve with 1100 l/min flow, 24 V AC coil, IP65 protection and LED status indication
- TypeTest Equipment
- Color/FinishRed
- Item Count1 pack
- Selling UnitBox
- Parts3 Years
- Labor1 Year
- 5/2 monostable valve directs flow both ways
- 1100 l/min standard flow at 26 mm width
- IP65 and NEMA 4 seal out dust and water
- 24 V AC coil runs 100 % duty cycle
- Pneumatic spring reset with 35 ms on, 43 ms off
5/2 Monostable Solenoid Valve 24V AC
The Festo VSVA-B-M52-AZH-A1-1AC1 is a 5/2-way monostable solenoid valve designed for pneumatic automation systems requiring reliable directional control. It operates on 24V AC supply with a standard nominal flow rate of 1100 l/min and a valve size of 26 mm. The piston gate design with soft sealing suits industrial machinery and process automation applications.
Check Voltage Pressure And Mounting
Verify that your control system supplies 24V AC at 50/60 Hz and that the permissible voltage fluctuation of -15% to +10% is acceptable for your installation. Ensure the compressed air supply meets ISO 8573-1:2010 [7:4:4] quality and that operating pressure stays within -0.9 bar to 16 bar. Confirm the pilot pressure range of 3 bar to 10 bar is available and that the IP65 NEMA 4 rating matches the environmental conditions.
Replaces 3/2 Or Lower Flow Valves
This valve upgrades from 3/2-way valves when double-acting cylinder control with reversible flow direction is required. The jump is worth it when flow rates above 1100 l/min are needed or when the 100% duty cycle and fast switching times of 35 ms on and 43 ms off improve cycle rates. It also replaces valves lacking external pilot air supply or flow control options on the exhaust.
Highlights
- 5/2 monostable valve directs flow both ways
- 1100 l/min standard flow at 26 mm width
- IP65 and NEMA 4 seal out dust and water
- 24 V AC coil runs 100 % duty cycle
- Pneumatic spring reset with 35 ms on, 43 ms off
Specifications
| Brand | FESTO |
|---|---|
| Model | VSVA-B-M52-AZH-A1-1AC1 547118 |
| Type | Test Equipment |
| Color/Finish | Red |
| Item Count | 1 pack |
| Selling Unit | Box |
| Parts | 3 Years |
| Labor | 1 Year |
Questions about this item
What is included in the box with the VSVA-B-M52-AZH-A1-1AC1 valve?
The box contains one VSVA-B-M52-AZH-A1-1AC1 5/2 solenoid valve, IP65 rated, with LED signal status display and non-detenting manual override.
Which flow rate figure should I use when sizing the VSVA-B-M52-AZH-A1-1AC1 for my application?
Use the standard nominal flow rate of 1100 l/min, which applies to the valve on an individual sub-base and for pneumatically concatenated flow.
What does the 24 V AC coil rating mean for daily operation of the VSVA-B-M52-AZH-A1-1AC1?
The coil draws 3.1 VA initial power and 2.3 VA holding power at 50/60 Hz, with a 100 % duty cycle and permissible voltage fluctuation of -15 % / +10 %.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
