Festo
Festo VPPM-8TA-L-1-F-0L2H-S1C1 572407 proportional pressure control valve 0.02-2 bar 450 l/min IP65
Controls outlet pressure from 0.02 to 2 bar with 450 l/min flow, IP65 protection and 21.6 to 26.4 V DC supply
- TypeTest Equipment
- Color/FinishRed
- Item Count1 pack
- Selling UnitBox
- Parts3 Years
- Labor1 Year
- Precise low-pressure control from 0.02 bar to 2 bar
- High 450 l/min flow rate for fast pneumatic response
- IP65 protection withstands dust and water jets in harsh environments
- LCD back-lit display gives clear pressure read-out at a glance
- Full electrical safeguards include short-circuit and reverse-polarity protection
Proportional pressure control valve for 0.02–2 bar
The Festo VPPM-8TA-L-1-F-0L2H-S1C1 is a pilot-controlled diaphragm regulator designed for precise pneumatic pressure control. It suits automation engineers and maintenance technicians who need repeatable pressure settings in machine-building or process applications. The valve operates on a 24 V DC supply and delivers a standard nominal flow rate of 450 l/min. Its IP65 rating allows installation in environments with moderate corrosion stress.
Practical limits of the electrical
The valve requires a DC operating voltage between 21.6 V and 26.4 V with a maximum current consumption of 300 mA and residual ripple of 10 %. Inlet pressure must stay within 0 bar to 4 bar while the regulated output spans 0.02 bar to 2 bar. Maximum pressure hysteresis is 0.01 bar. The duty cycle is 100 % and maximum electrical power consumption is 7 W. Operation with oil lubrication is not possible and the medium temperature range is 10 °C to 50 °C.
The hysteresis figure that defines positioning
Max. pressure hysteresis of 0.01 bar is the single specification that determines whether this valve meets the precision requirement of a given control loop. Buyers needing tighter pressure repeatability must verify this value against their process tolerance. The safety position maintains outlet pressure in uncontrolled form if the supply cable breaks, which may not suit fail-safe designs requiring exhaust on power loss.
Highlights
- Precise low-pressure control from 0.02 bar to 2 bar
- High 450 l/min flow rate for fast pneumatic response
- IP65 protection withstands dust and water jets in harsh environments
- LCD back-lit display gives clear pressure read-out at a glance
- Full electrical safeguards include short-circuit and reverse-polarity protection
Specifications
| Brand | FESTO |
|---|---|
| Model | VPPM-8TA-L-1-F-0L2H-S1C1 572407 |
| Type | Test Equipment |
| Color/Finish | Red |
| Item Count | 1 pack |
| Selling Unit | Box |
| Parts | 3 Years |
| Labor | 1 Year |
Questions about this item
Should I pick the 0.02-2 bar range or a wider pressure span?
This valve covers 0.02 to 2 bar with a maximum hysteresis of 0.01 bar; choose it when your process needs fine control within that window.
What does the 450 l/min flow rating mean on the bench?
At 6 bar supply the valve delivers up to 450 l/min standard nominal flow, so size your downstream circuit to match that capacity.
How does the 21.6-26.4 V DC supply limit the installation?
The unit requires a 24 V DC source within 21.6 to 26.4 V and draws up to 300 mA, so your power supply must stay inside that voltage band.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
