We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Red Festo ISO cylinder DSBC-80-125-PPVA-N3 in box

Festo

Festo DSBC-80-125-PPVA-N3 1383338 ISO cylinder electrician tool

SKU CH-PVPW-D8DMG MPN DSBC-80-125-PPVA-N3

ISO pneumatic cylinder with 80 mm bore and 125 mm stroke for automated motion control

  • TypeTest Equipment
  • Color/FinishRed
  • Item Count1 pack
  • Selling UnitBox
  • Parts3 Years
  • Labor1 Year
  • ISO cylinder for reliable pneumatic motion control
  • 80 mm bore and 125 mm stroke suit medium-force applications
  • Festo engineering ensures consistent performance in test equipment setups
  • Red finish provides clear visual identification on the workbench
  • Supplied as a single unit in a protective box

Festo ISO Cylinder 1383338

The Festo DSBC-80-125-PPVA-N3 is a pneumatic ISO cylinder built for electricians who need reliable linear actuation in control cabinets or machine builds. It carries part number 1383338 and is supplied new in a single pack. The unit suits maintenance engineers and panel builders specifying Festo components for standardized installations.

Thermals noise and power draw

As a pneumatic actuator the cylinder produces no electrical heat and draws no current during operation. Noise is limited to exhaust air at the port and the mechanical impact of the piston at end of stroke. No power supply or cooling provision is required for the cylinder itself.

Included accessories and software

The box contains one cylinder ready for mounting with standard ISO interface dimensions. A three-year parts cover and one-year labour cover apply to the unit. No software, sensors, fittings or mounting brackets are bundled so installers must source those separately.

Highlights

  • ISO cylinder for reliable pneumatic motion control
  • 80 mm bore and 125 mm stroke suit medium-force applications
  • Festo engineering ensures consistent performance in test equipment setups
  • Red finish provides clear visual identification on the workbench
  • Supplied as a single unit in a protective box

Specifications

BrandFESTO
ModelDSBC-80-125-PPVA-N3
TypeTest Equipment
Color/FinishRed
Item Count1 pack
Selling UnitBox
Parts3 Years
Labor1 Year

Questions about this item

How do I mount the DSBC-80-125-PPVA-N3 cylinder correctly, and which alignment step is often missed?

Mount the ISO cylinder using its standard 80 mm bore pattern, then align the 125 mm stroke centreline with the load before tightening; the step often missed is verifying parallelism with a dial gauge to avoid side-load wear.

Which wearable part of the DSBC-80-125-PPVA-N3 will need replacement first during regular service?

The piston rod seal kit is the primary wear item; plan to inspect and replace it at the interval recommended for 80 mm bore cylinders operating at your cycle rate.

What performance limit appears first when the DSBC-80-125-PPVA-N3 runs continuous cycles under load?

Heat buildup in the 125 mm stroke chamber reduces seal life and causes pressure drop, so monitor cylinder body temperature and pause cycles if it exceeds the rated operating range.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.