Festo
Festo DSBC-32-80-D3-PPVA-N3 32 80 3656518 ISO cylinder electrician tool
ISO cylinder with 32 mm bore and 80 mm stroke for pneumatic automation systems
- TypeTest Equipment
- Color/FinishRed
- Item Count1 pack
- Selling UnitBox
- Parts3 Years
- Labor1 Year
- ISO standard cylinder ensures reliable pneumatic performance
- 32 mm bore and 80 mm stroke deliver precise linear motion
- Festo engineering provides durable construction for demanding applications
- Red finish allows quick visual identification in tool kits
- New condition guarantees full factory specification compliance
Festo DSBC-32-80 ISO cylinder
This Festo DSBC-32-80-D3-PPVA-N3 ISO cylinder is a pneumatic actuator built to ISO standards for linear motion tasks. Electricians and automation technicians use it to drive clamping, lifting or pushing mechanisms in control cabinets and machine frames. The 32 mm bore and 80 mm stroke suit medium-force applications where precise positioning matters. Supplied new in a single pack under part number 3656518.
Mounting and air supply basics
The cylinder mounts with standard ISO hole patterns so it bolts directly to compatible brackets without adapters. Connect compressed air to the two ports using push-in fittings matched to the port thread; incorrect tubing size causes leaks or erratic speed. Ensure the supply is filtered and lubricated to specification — contaminated air shortens seal life quickly. The red finish helps visual inspection for damage during routine checks.
Force envelope and stroke limit
At typical system pressure the 32 mm bore delivers enough thrust for door actuators, feeder stops and small press operations. The 80 mm stroke defines the maximum travel; applications needing longer extension must choose a different variant. Over-pressurising beyond rated limits risks seal extrusion and sudden failure. The cylinder handles repetitive cycling in automated sequences but is not sized for heavy structural loads.
Highlights
- ISO standard cylinder ensures reliable pneumatic performance
- 32 mm bore and 80 mm stroke deliver precise linear motion
- Festo engineering provides durable construction for demanding applications
- Red finish allows quick visual identification in tool kits
- New condition guarantees full factory specification compliance
Specifications
| Brand | FESTO |
|---|---|
| Model | DSBC-32-80-D3-PPVA-N3 |
| Type | Test Equipment |
| Color/Finish | Red |
| Item Count | 1 pack |
| Selling Unit | Box |
| Parts | 3 Years |
| Labor | 1 Year |
Questions about this item
How do I confirm the ISO cylinder is operating correctly after installation?
The cylinder should extend and retract smoothly through its full 80 mm stroke at the rated pressure; listen for quiet, consistent movement and check that the piston rod shows no binding or leakage at the seals.
What components are included in the box and what must be sourced separately?
The box contains one Festo DSBC-32-80-D3-PPVA-N3 ISO cylinder (part 3656518); mounting brackets, fittings, tubing and position sensors are not included and must be purchased separately.
Which bore and stroke combination should I select for my application?
This model provides a 32 mm bore with an 80 mm stroke; choose it when the required force at your supply pressure matches the 32 mm bore area and the travel distance needed is 80 mm.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
