Festo
Festo CPE14-M1BH-5/3G-QS-8 solenoid valve 14mm 196904
A 14 mm solenoid valve, model CPE14-M1BH-5/3G-QS-8 part 196904, supplied as a single unit in a box
- TypeTest Equipment
- Color/FinishRed
- Item Count1 pack
- Selling UnitBox
- Parts3 Years
- Labor1 Year
- 14 mm width fits compact pneumatic layouts
- 5/3 G function provides closed-centre control for precise positioning
- QS-8 push-in ports speed up tubing connections
- Festo 196904 quality ensures reliable switching cycles
- Red housing aids quick visual identification in panels
Compact 14 mm solenoid valve for pneumatic control
The Festo CPE14-M1BH-5/3G-QS-8 is a 14 mm wide solenoid valve designed for precise pneumatic switching in automation systems. It suits engineers and technicians who need reliable directional control in space-constrained panels or machines. The 5/3 configuration provides three distinct positions for advanced flow management. This new unit arrives in a single pack ready for integration.
Replaces larger or slower-acting valves in tight
Upgrade from bulkier valves when panel width is limited to 14 mm or when faster response times are required for cycling actuators. The jump is worth it when existing valves cause flow restrictions or when a 5/3 centre-closed function simplifies circuit design. It also fits when older valves lack the quick-connect ports that reduce tubing labour. Avoid if your manifold uses a different width or port pattern.
Simple DIN-rail or manifold mounting with push
Installation uses standard QS-8 push-in fittings for 8 mm tubing, so no threading tools are needed. The valve slides onto a CPE14 manifold rail and locks with a single screw. Common issues include reversing the supply and exhaust ports, which causes unexpected actuator motion, and forgetting to lubricate O-rings during manifold assembly, leading to leaks. Verify coil voltage matches the controller before wiring.
Highlights
- 14 mm width fits compact pneumatic layouts
- 5/3 G function provides closed-centre control for precise positioning
- QS-8 push-in ports speed up tubing connections
- Festo 196904 quality ensures reliable switching cycles
- Red housing aids quick visual identification in panels
Specifications
| Brand | Festo |
|---|---|
| Model | CPE14-M1BH-5/3G-QS-8 |
| Type | Test Equipment |
| Color/Finish | Red |
| Item Count | 1 pack |
| Selling Unit | Box |
| Parts | 3 Years |
| Labor | 1 Year |
Questions about this item
What width clearance does the 14 mm valve body require for manifold mounting?
The valve body is 14 mm wide, so the manifold station must provide at least that pitch between ports.
Which electrical connector orientation should face the wiring loom during installation?
Align the solenoid coil so its connector points toward the cable entry; reversing it blocks the plug and forces rework.
When should the internal seals be inspected on a 5/3G valve running continuous cycling?
Plan a seal check after three years of service or one year of heavy actuation, whichever comes first.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
