Festo
Festo CPE14-M1BH-3OLS-1/8 solenoid valve 14 mm
A 14 mm solenoid valve for pneumatic control, supplied as a single unit in a box
- TypeTest Equipment
- Color/FinishRed
- Item Count1 pack
- Selling UnitBox
- Parts3 Years
- Labor1 Year
- Compact 14 mm width fits tight pneumatic layouts
- 196932 part number ensures exact replacement ordering
- Red colour finish allows quick visual identification
- Supplied as single unit in protective box
- Classified as test equipment for diagnostic applications
Festo 14 mm solenoid valve for pneumatic control
The Festo CPE14-M1BH-3OLS-1/8 is a 14 mm wide solenoid valve designed for pneumatic automation tasks. It suits engineers and technicians building or maintaining compressed-air systems that require a compact, electrically actuated valve. The unit is supplied new in a single pack.
Practical limits of the 14 mm form factor
The 14 mm width restricts flow capacity compared with larger valves, so it fits low-to-medium flow applications. Operating pressure and voltage range are defined by the manufacturer datasheet; exceeding those limits will cause unreliable switching or damage. The valve is sold as test equipment, indicating it is intended for bench verification or light-duty cycles rather than continuous high-cycle production lines.
Installation notes and common issues
Mount the valve on a compatible manifold or sub-base using the standard 14 mm pattern; ensure tubing connections are clean to prevent leakage. Wiring must match the coil specification shown in the datasheet — incorrect voltage is the most frequent cause of failure. Verify seal orientation during assembly; reversed seals are a typical source of air loss.
Highlights
- Compact 14 mm width fits tight pneumatic layouts
- 196932 part number ensures exact replacement ordering
- Red colour finish allows quick visual identification
- Supplied as single unit in protective box
- Classified as test equipment for diagnostic applications
Specifications
| Brand | Festo |
|---|---|
| Model | CPE14-M1BH-3OLS-1/8 |
| Type | Test Equipment |
| Color/Finish | Red |
| Item Count | 1 pack |
| Selling Unit | Box |
| Parts | 3 Years |
| Labor | 1 Year |
Questions about this item
Which version of the CPE14-M1BH-3OLS-1/8 should I choose for a 14 mm manifold?
This model is built for a 14 mm width, so it fits directly onto a compatible 14 mm manifold without adapters.
What does the 14 mm width mean once the valve is installed in a machine?
It defines the valve’s physical footprint on the manifold, determining station spacing and overall stack length.
What interface standard does the 1/8 port follow and what does it limit in practice?
The G 1/8 threaded port accepts standard pneumatic fittings and caps the maximum flow to the fitting’s rated capacity.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
