We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black ribbon cable with a 10-pin female block and two USB 2.0 Type-A plugs

Fervit

Fervit Motherboard 9Pin 10Pin to Dual USB 2.0 Male Cable 50cm

SKU CH-4ADF-29792

Converts a 10-pin motherboard header into two USB 2.0 male ports with a 50cm cable supporting 480MBit/s speeds

  • Add two USB 2.0 ports from one motherboard header
  • 50 cm cable reaches front-panel or rear brackets
  • Direct plug-in design needs no extra adapters
  • Supports 480 Mbit/s transfer on each port
  • Fits any standard 9-pin or 10-pin USB 2.0 header

Internal header to dual USB 2.0 adapter

This 50 cm cable converts a single 9-pin or 10-pin motherboard header into two standard USB 2.0 Type-A male ports. It is aimed at builders who need extra front-panel or rear connections without occupying a PCI bracket. The compact design plugs directly into the header and requires no extra brackets or screws.

Sustained throughput on USB 2.0

The link operates at the USB 2.0 specification with a maximum signalling rate of 480 MBit/s. Under continuous transfer the bandwidth is shared between the two ports, so simultaneous heavy use on both connectors will reduce per-port speed. The cable adds no active circuitry, so latency and power delivery follow the motherboard header limits.

Header layout and clearance check

Verify that your board provides a standard 9-pin or 10-pin USB 2.0 header with the common pinout before ordering. Ensure 50 cm of routing space exists from the header to the desired port location without stretching the cable. The splitter occupies only the single header; no additional internal connectors or power feeds are needed.

Highlights

  • Add two USB 2.0 ports from one motherboard header
  • 50 cm cable reaches front-panel or rear brackets
  • Direct plug-in design needs no extra adapters
  • Supports 480 Mbit/s transfer on each port
  • Fits any standard 9-pin or 10-pin USB 2.0 header

Specifications

BrandFervit

Questions about this item

Does the 50 cm cable add noticeable heat or power draw when the two USB 2.0 ports run all day?

The adapter is a passive cable, so it adds no active heat and draws only the tiny current the connected USB 2.0 devices require.

What must my motherboard already have for this Fervit cable to work?

A free 9-pin or 10-pin internal USB 2.0 header on the mainboard.

Will the 480 Mbit/s link work reliably with older USB 1.1 peripherals I still use?

Yes, the USB 2.0 interface is backward compatible, so legacy USB 1.1 devices will operate at their native speed.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.