We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green PCB adapter board with dual Oculink ports and M.2 slots

Fervit

Fervit M.2 to Oculink Adapter PCIe 4.0/5.0 x4 SFF-8611/8612 NVME 2230-22110mm

SKU CH-DBB6-MKW5Q

Connects dual M.2 NVME SSDs in 2230 to 22110 sizes via PCIe 4.0/5.0 x4 SFF-8611/8612 Oculink with SATA power required

  • Supports PCIe 4.0 and 5.0 x4 bandwidth for fast NVME storage
  • Fits M.2 NVME SSDs in 2230, 2242, 2260, 2280 and 22110 lengths
  • Dual SFF-8611 and SFF-8612 Oculink connectors for internal system installation
  • Works with one or two NVME drives per Oculink link
  • Requires SATA power to operate the adapter

Dual NVMe Oculink Adapter

This Fervit adapter connects one or two M.2 NVMe SSDs to a system using Oculink SFF-8611 or SFF-8612 connectors. It supports drive lengths from 2230 up to 22110mm and requires a SATA power connection for operation. The card is designed for PCIe NVMe drives only and does not function with SATA or SAS protocols. Builders needing to add high-speed NVMe storage via an Oculink interface will find this adapter suitable.

PCIe 4.0/5.0 x4 Interface Limits

The adapter operates over a PCIe 4.0 or 5.0 x4 link through the Oculink connectors. Bandwidth is limited to the capabilities of the host controller and the installed SSDs. The device cannot convert NVMe signals to SATA or SAS, nor can it adapt NGFF, SATA, or SAS drives to Oculink. Users requiring protocol translation or support for non-NVMe M.2 drives must use a different solution.

Internal Mounting and Connector Implications

Dual internal SFF-8611/8612 ports allow a clean internal cable run to a compatible motherboard or backplane. The adapter accommodates multiple M.2 form factors from 2230 to 22110mm on a single PCB. A standard SATA power cable must be connected to supply the drives. The design focuses on NVMe-only operation without support for Slimline SAS HD or other storage interfaces.

Highlights

  • Supports PCIe 4.0 and 5.0 x4 bandwidth for fast NVME storage
  • Fits M.2 NVME SSDs in 2230, 2242, 2260, 2280 and 22110 lengths
  • Dual SFF-8611 and SFF-8612 Oculink connectors for internal system installation
  • Works with one or two NVME drives per Oculink link
  • Requires SATA power to operate the adapter

Specifications

BrandFervit

Questions about this item

Which SSD lengths does the adapter support?

It fits dual M.2 NVMe drives in 2230, 2242, 2260, 2280 and 22110 form factors.

What bandwidth does the PCIe 4.0/5.0 x4 link deliver to the drives?

Each NVMe SSD sees a full x4 lane connection at up to PCIe 4.0 or 5.0 speeds through the Oculink interface.

Which Oculink connector versions are used on the board?

The card provides dual SFF-8611/8612 ports for internal Oculink cables.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.