We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Dual USB 3.0 Type-A panel mount with 20-pin header cable 50cm

Fervit

Fervit Dual Port USB 3.0 Female Type-A Panel Mount to Motherboard 20-Pin 19-Pin Header Cable 50cm

SKU CH-EQ0G-JWPBX

Adds two panel-mount USB 3.0 Type-A ports to a motherboard 20-pin header with a 50 cm cable

  • Adds two front-panel USB 3.0 Type-A ports from a single 20-pin header
  • Panel-mount design with two screw holes for secure chassis installation
  • Delivers up to 5 Gbps throughput with USB 3.0 host and device
  • Compliant with USB 3.0 base specification for broad compatibility
  • 50 cm cable length suits most mid-tower and full-tower builds

Dual USB 3.0 Panel-Mount Cable

This Fervit cable adds two USB 3.0 Type-A ports to a desktop front panel or custom enclosure. It connects to a single motherboard 20-pin USB 3.0 header and includes screw holes for secure panel mounting. Builders expanding front-panel connectivity or integrating external drive bays will find it a direct fit. It is not for systems lacking a 20-pin USB 3.0 header or for adding ports to a USB 2.0 header.

Sustained 5 Gbps Throughput

When paired with a USB 3.0 host controller and device, the link maintains up to 5 Gbps during extended transfers rather than only in brief bursts. Compliance with the USB Base Specification 3.0 ensures consistent signalling across the 50 cm cable length. The dual-port splitter divides bandwidth between the two sockets, so simultaneous heavy traffic shares the available throughput.

Single 20-Pin Header Requirement

The decisive specification is the motherboard 20-pin USB 3.0 header; without it the cable cannot be installed. The 50 cm length and panel-mount screw holes are fixed, so the chassis must accommodate both. Buyers needing a 19-pin header connection or a different cable length must choose another part.

Highlights

  • Adds two front-panel USB 3.0 Type-A ports from a single 20-pin header
  • Panel-mount design with two screw holes for secure chassis installation
  • Delivers up to 5 Gbps throughput with USB 3.0 host and device
  • Compliant with USB 3.0 base specification for broad compatibility
  • 50 cm cable length suits most mid-tower and full-tower builds

Specifications

BrandFervit

Questions about this item

Does the 50 cm cable add noticeable heat or power draw when the two USB 3.0 ports run all day?

The cable is a passive 50 cm link; it draws no extra power and generates no measurable heat while the two USB 3.0 Type-A ports operate at up to 5 Gbps.

What must my motherboard already have for this panel-mount cable to work?

A free USB 3.0 19-pin or 20-pin internal header is required to connect the single header plug.

Will USB 2.0 devices plugged into the two Type-A ports work correctly alongside older USB 2.0 headers I keep?

Yes, the cable is compliant with USB 3.0 and backward compatible, so USB 2.0 peripherals run on the two ports while your existing USB 2.0 headers remain unaffected.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.