We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Fervit

Fervit 4-in-1 USB 2.0 Type-A to DC 5.5x2.1mm 4.0x1.7mm 3.5mm 2.5mm 150cm

SKU CH-CFPT-J8Y1R

A 150 cm USB 2.0 Type-A cable splits into four DC barrel and mono plugs for 5 V devices

  • Four barrel sizes from one USB-A port
  • 22AWG pure copper conductor for reliable 5 V delivery
  • 150 cm cable reaches devices across a desk
  • Centre-positive 5.5 × 2.1 mm and 4.0 × 1.7 mm tips
  • 5 mm and 3.5 mm mono plugs for legacy power sockets

Four barrel sizes on one cable

This 4-in-1 cable converts a USB Type-A 5 V source into four DC barrel connectors: 5.5×2.1 mm, 4.0×1.7 mm, 3.5 mm mono and 2.5 mm mono. It suits owners of routers, hubs or small devices that use any of those four plug sizes and want a single spare or travel lead.

22AWG copper and fixed polarity

The 22AWG pure copper conductors carry 5 V from the USB port to the selected barrel tip. The cable enforces centre-positive, sleeve-negative polarity and the two mono plugs carry power only — they must not be inserted into audio jacks. Length is 150 cm.

Check device voltage and polarity first

Verify the target equipment requires exactly 5 V with centre-positive polarity before connecting. A 12 V source will damage the device and the cable. Ensure the chosen barrel matches the jack dimensions and do not use the 2.5 mm or 3.5 mm plugs for audio.

Highlights

  • Four barrel sizes from one USB-A port
  • 22AWG pure copper conductor for reliable 5 V delivery
  • 150 cm cable reaches devices across a desk
  • Centre-positive 5.5 × 2.1 mm and 4.0 × 1.7 mm tips
  • 5 mm and 3.5 mm mono plugs for legacy power sockets

Specifications

BrandFervit

Questions about this item

Will the 22AWG copper conductors need replacing after frequent bending?

The 22AWG pure copper cord is built for regular flexing; inspect connectors periodically and replace the cable if insulation shows wear or pins become loose.

What is the maximum continuous current the 5.5x2.1mm barrel can handle before voltage drop becomes an issue?

With 22AWG conductors at 150cm length, expect noticeable drop above roughly 2 A; keep sustained loads below that for stable 5 V delivery.

Does the cable get warm when powering a 5 V device all day from a USB-A port?

At typical loads under 2 A the 22AWG wire stays near ambient; only heavy continuous draw near the port’s limit produces detectable warmth.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.