We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Fervit 19/20-pin motherboard header to dual USB 3.0 female screw-mount 90-degree up-angled cable 30cm

Fervit

Fervit 19/20Pin Motherboard Header to USB 3.0 Dual Port Female Screw Mount 90 Degree Up Angled Cable 30cm

SKU CH-EPX1-9Z18T

Converts a motherboard 19/20-pin header into two screw-mount USB 3.0 ports with a 90-degree angled 30 cm cable for tight spaces

  • Converts a 19 or 20 pin motherboard header into two USB 3.0 ports
  • 90 degree upward angle fits tight spaces around the header
  • Dual screw holes on the female end secure the cable in place
  • 30 cm length reaches front panel headers without excess slack
  • 5 Gbps transfer rate enables simultaneous two-way data flow

Internal USB 3.0 header adapter

This Fervit cable converts a motherboard 19/20pin header into two USB 3.0 female ports. It is intended for builders adding front-panel connectivity to a chassis that lacks native USB 3.0 ports. The 30cm length suits compact routing inside small cases.

Signal integrity and power

The link operates at 5Gbps, which is 10 times the throughput of USB 2.0. Full-duplex signalling allows simultaneous upstream and downstream traffic without extra host-side bandwidth negotiation.

Mounting and clearance

Two screw holes on the USB 3.0 end secure the bracket to a case cut-out. The 90-degree up-angled connector fits behind drive cages or tight panel lips where a straight plug would foul adjacent components.

Highlights

  • Converts a 19 or 20 pin motherboard header into two USB 3.0 ports
  • 90 degree upward angle fits tight spaces around the header
  • Dual screw holes on the female end secure the cable in place
  • 30 cm length reaches front panel headers without excess slack
  • 5 Gbps transfer rate enables simultaneous two-way data flow

Specifications

BrandFervit

Questions about this item

How do I connect the 19/20 pin header to the motherboard without bending pins?

Align the keyed 19/20 pin plug with the motherboard header, press straight down until fully seated, then secure the dual USB 3.0 female bracket using the two screw holes.

Will the screw-mount bracket or 30 cm cable need periodic replacement?

The screw-mount bracket and 30 cm cable are passive components with no moving parts; they do not require scheduled replacement under normal use.

What limits sustained throughput on the dual USB 3.0 ports?

The shared 5 Gbps link from the single 19/20 pin header caps combined throughput when both ports transfer data simultaneously.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.