We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 90-degree 12VHPWR adapter with four 8-pin connectors and 2.0m cable

Fervit

Fervit 12VHPWR ATX 3.0 PCI-E 5.0 Adapter 12+4P to 4x 8P 90° 2.0M

SKU CH-5SC6-28JQ1

ATX 3.0 PCIe 5.0 adapter converts four 8-pin cables into one 12+4-pin 12VHPWR connector for 600 W graphics cards

  • Delivers up to 600W power for RTX 4080 and 5090TI cards
  • PCI-SIG 12VHPWR H+ standard with 12+4 pin connector for PCIe 5.0 graphics
  • Four 8-pin ATX inputs convert to single 16-pin 12VHPWR output
  • 90-degree angled low-profile design eases routing in tight cases
  • 0 metre cable length gives flexible placement in full-tower builds

12VHPWR adapter for PCIe 5.0 graphics cards

This modular adapter converts a 16-pin 12VHPWR connector into four 8-pin ATX power inputs. It is designed for builders installing PCIe 5.0 graphics cards that require the new 12+4 pin power standard. The right-angle 90-degree plug eases routing in tight chassis layouts.

600 W limit of the 12VHPWR connector

The PCI-SIG 12VHPWR H+ interface is rated for up to 600 W of power delivery. Supplying the full rating requires all four 8-pin cables to be connected to a compatible power supply. The adapter itself does not increase the wattage available from the PSU.

Check PSU cables and card clearance before ordering

Verify that your power supply provides four separate 8-pin PCIe cables or connectors. Ensure the graphics card’s 12VHPWR socket orientation matches the adapter’s upward 90-degree angle. The 2.0 m cable length must reach from the PSU to the card without strain.

Highlights

  • Delivers up to 600W power for RTX 4080 and 5090TI cards
  • PCI-SIG 12VHPWR H+ standard with 12+4 pin connector for PCIe 5.0 graphics
  • Four 8-pin ATX inputs convert to single 16-pin 12VHPWR output
  • 90-degree angled low-profile design eases routing in tight cases
  • 0 metre cable length gives flexible placement in full-tower builds

Specifications

BrandFervit

Questions about this item

Should I pick the 2.0 metre length or a shorter cable for my build?

The 2.0 metre length gives ample reach for full-tower cases and bottom-mounted power supplies while the 90° angled plug keeps the bend radius tight against the graphics card.

What does the 600 W rating mean when the adapter is plugged into a modern graphics card?

The 12VHPWR H+ connector is rated for 600 W so a single cable can feed an RTX 40-series or RDNA 3 card without daisy-chaining multiple 8-pin leads.

Does the ATX 3.0 and PCI-E 5.0 label change what power the four 8-pin plugs can actually deliver?

The adapter converts one 16-pin 12+4 connector into four 8-pin sockets; the 600 W ceiling is set by the 12VHPWR specification, not by the ATX 3.0 or PCI-E 5.0 branding.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.