We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 16-pin 12VHPWR connector splitting to four 8-pin plugs, 90-degree angled, 1.0M cable

Fervit

Fervit 12VHPWR ATX 3.0 PCI-E 5.0 16Pin to 4x 8P 90° 1.0M

SKU CH-WQ7S-EWQ9X

ATX 3.0 modular adapter converts one 12VHPWR 16-pin connector into four 8-pin plugs with a 90-degree angle and 1.0 m length

  • Delivers up to 600W for RTX 4080 and 5090TI cards
  • ATX 3.0 and PCI-E 5.0 compliant 12VHPWR 16-pin connector
  • Angled 90° design eases routing in tight cases
  • 0 metre length suits full-tower and mid-tower builds
  • Four 8-pin outputs connect to standard modular PSU cables

Power delivery spec

This adapter cable converts a single 12VHPWR connector into four standard 8-pin PCIe plugs. It is built for ATX 3.0 and PCIe 5.0 power supplies feeding high-end graphics cards. The assembly supports up to 600W through the 12+4 pin interface.

Connector layout check

Verify that your power supply provides a native 12VHPWR output or includes the correct modular cable for this header. Ensure the graphics card requires a 16-pin 12VHPWR input rather than legacy 8-pin sockets. The 90-degree angled heads need clearance above the card edge.

Build integration

Four 8-pin leads branch from the main 1.0M cable, reducing the number of separate cables routed through the case. The low-profile 90-degree bends help the assembly sit close to the PCB in tight chassis windows. It frees up extra modular ports on the power supply for other components.

Highlights

  • Delivers up to 600W for RTX 4080 and 5090TI cards
  • ATX 3.0 and PCI-E 5.0 compliant 12VHPWR 16-pin connector
  • Angled 90° design eases routing in tight cases
  • 0 metre length suits full-tower and mid-tower builds
  • Four 8-pin outputs connect to standard modular PSU cables

Specifications

BrandFervit

Questions about this item

Does the cable include the four 8-pin connectors or must they be purchased separately?

The adapter is a single unit with a 16-pin 12VHPWR plug on one end and four fixed 8-pin PCIe connectors on the other, so nothing extra is required.

Which length should I choose for a standard mid-tower build?

The 1.0M length is the only version supplied and is sized to reach from a bottom-mounted PSU to a top-mounted graphics card in typical cases.

What does the 600 W rating mean when the card is under full load?

The 12VHPWR H+ connector is rated for up to 600 W, matching the PCIe 5.0 specification for RTX 40-series and RDNA 3 cards such as the 4080 and 5090TI.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.