We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Amber LED warning light in grey glass-reinforced polyester housing with Fresnel polycarbonate lens

Federal Signal

Federal Signal G-LED-AC-D-A Hazardous Location Fixture, Amber, 120-240V AC, 60/75/90 FPM

SKU CH-T2TJ-6216H

Amber LED warning light for hazardous locations, operating on 120-240V AC with selectable 60, 75 or 90 flashes per minute and IP66 rating

  • Amber LED flashes at 60, 75 or 90 FPM for clear warning signals
  • 400 lumen output with 50,000-hour lamp life reduces maintenance intervals
  • IP66-rated glass-reinforced polyester housing withstands harsh environments
  • Operates from -58 °F to 158 °F for extreme temperature reliability
  • 120-240 V AC input draws only 0.12-0.07 A for efficient power use

Hazardous Location Amber LED Fixture

The Federal Signal G-LED-AC-D-A is a surface-mount warning light built for hazardous environments. It uses an amber LED source rated at 400 lumens with a Fresnel polycarbonate lens and glass-reinforced polyester housing. Selectable flash rates of 60, 75 or 90 flashes per minute suit industrial safety signalling needs. Rated IP66 and operating from -58 to 158 degrees F, it withstands severe conditions.

AC Voltage Range and Current Draw Limits

The fixture operates on 120 to 240V AC supply, drawing between 0.12 and 0.07 amps across that range. Wiring must accommodate the voltage present at the installation point and the corresponding current. No internal battery or alternative power source is included; continuous AC supply is required for operation.

Pre-Installation Checks for Existing Setup

Verify that the mounting surface can support the unit dimensions of 7 29/64 inches width, 7 29/64 inches depth and 7 1/2 inches height. Confirm the supply voltage falls within 120 to 240V AC and that circuit protection suits the 0.12 to 0.07 amp draw. Ensure ambient temperatures stay within the -58 to 158 degree F operating window.

Highlights

  • Amber LED flashes at 60, 75 or 90 FPM for clear warning signals
  • 400 lumen output with 50,000-hour lamp life reduces maintenance intervals
  • IP66-rated glass-reinforced polyester housing withstands harsh environments
  • Operates from -58 °F to 158 °F for extreme temperature reliability
  • 120-240 V AC input draws only 0.12-0.07 A for efficient power use

Specifications

BrandFEDERAL SIGNAL

Questions about this item

Should I pick the 60, 75, or 90 flashes-per-minute setting?

Choose 60 FPM for standard warning visibility, 75 FPM for heightened attention in busy areas, or 90 FPM for maximum urgency signalling; all three are selectable on the same fixture.

What does the 400-lumen output deliver in an actual installation?

The 400-lumen LED produces a bright amber signal visible at long distance, suitable for hazardous-area marking and vehicle warning duties.

How does the 120-240 V AC input affect flash-rate stability?

The fixture draws 0.12 A at 120 V and 0.07 A at 240 V while maintaining the chosen 60, 75, or 90 FPM rate across the full voltage range.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.