We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

FastCap LLC

FastCap STAPE 1"×50' Double Sided Film Tape 5.5 mil

SKU CH-R9KB-2MTFN

Transparent double-sided film tape, 1 in × 50 ft, 5.5 mil thick, acrylic adhesive on polyester backing, rated 65 to 75 °F

  • ColorTransparent
  • Transparent 5.5 mil film bonds cleanly without residue
  • Double-sided acrylic adhesive holds on both surfaces at once
  • 1 in × 50 ft roll covers long runs without splicing
  • Polyester backing resists tearing during application
  • Performs reliably between 65 and 75 °F

Product Identity

This is a double-sided polyester film tape branded FastCap Speedtape. It comes on a 1 in wide by 50 ft long roll with a 5.5 mil thickness. The acrylic adhesive bonds between 65 and 75 degrees Fahrenheit.

Best Fit

Suited for general bonding tasks where a thin, transparent film tape is required within the stated temperature window. Not suited for applications that need higher heat resistance, wider rolls, or a different adhesive chemistry.

Setup Check

Verify that the surfaces to be bonded will stay between 65 and 75 degrees Fahrenheit during use. Confirm that a 1 in width and 50 ft length match the project requirements. Ensure the acrylic adhesive is compatible with the substrate materials.

Highlights

  • Transparent 5.5 mil film bonds cleanly without residue
  • Double-sided acrylic adhesive holds on both surfaces at once
  • 1 in × 50 ft roll covers long runs without splicing
  • Polyester backing resists tearing during application
  • Performs reliably between 65 and 75 °F

Specifications

BrandFASTCAP
ColorTransparent

Questions about this item

What surface temperature range does the 5.5 mil acrylic adhesive require to bond properly?

The tape performs between 65 and 75 degrees Fahrenheit, so the surface must be within that range for reliable adhesion.

Will the 1-inch-wide polyester film backing stick to low-energy plastics like polyethylene?

Acrylic adhesive on polyester film is designed for general bonding; low-energy plastics may need surface preparation or a different adhesive system.

How can I confirm the roll length after unboxing the 1 in × 50 ft tape?

Measure the unrolled tape against a straight edge — it should extend 50 feet from end to end.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.