FASCO
FASCO UB599 Unit Bearing Motor 1/100 HP 0.27 A CW 230 V hvac control
Single-phase shaded-pole motor delivers 1/100 HP at 550 RPM with CW rotation on 230 V AC
- ColorTransparent
- 1/100 HP shaded-pole motor delivers 9 W continuous output
- 27 A full-load current keeps circuit loading low
- 1,550 RPM single-speed suits steady airflow needs
- 230 V AC operation matches standard HVAC supply
- Totally enclosed air-over design protects windings in 40 °C ambients
HVAC Unit Bearing Motor 1/100 HP
The FASCO UB599 is a shaded-pole unit bearing motor rated at 1/100 HP for 230 V AC single-phase supply. It delivers 9 W output at 1,550 RPM with a clockwise shaft rotation when viewed from the lead end. The motor carries automatic thermal protection and Class B insulation for continuous duty in HVAC control applications.
Shaded-pole single-phase limits
Shaded-pole designs provide fixed-speed operation at 60 Hz with no provision for speed control or reversible rotation. The motor is not usable at 208 V or 200 V and requires a 230 V supply drawing 0.27 A full-load current. Ambient temperature must not exceed 40 °C and the totally enclosed air-over enclosure depends on external airflow for cooling.
Rear double-foot mounting constraint
Installation requires a rear double-foot mounting pattern that matches the non-standard frame of this unit. Builders whose equipment uses a different foot spacing or a resilient-ring mount cannot use this motor without fabricating an adapter bracket.
Highlights
- 1/100 HP shaded-pole motor delivers 9 W continuous output
- 27 A full-load current keeps circuit loading low
- 1,550 RPM single-speed suits steady airflow needs
- 230 V AC operation matches standard HVAC supply
- Totally enclosed air-over design protects windings in 40 °C ambients
Specifications
| Brand | FASCO |
|---|---|
| Color | Transparent |
Questions about this item
Which version of the FASCO UB599 unit bearing motor should I choose for my HVAC system?
The FASCO UB599 is offered as a single configuration: a shaded-pole motor rated at 1/100 HP, 230 V AC, 0.27 A full-load current, 1,550 RPM, clockwise rotation, and a non-standard frame with rear double-foot mounting.
What does the 1/100 HP rating mean once the motor is installed in my equipment?
At 1/100 HP the motor delivers approximately 9 W of mechanical output, suitable for light-duty air-over applications such as small fan or blower wheels in residential HVAC controls.
What voltage standard does the UB599 use and what does that limit in practice?
The motor is designed for 230 V AC, 60 Hz single-phase supply and is not usable at 208 V or 200 V, so it must be connected to a true 230 V circuit.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
