We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
FASCO D895 condenser fan motor, cylindrical metal body, stud mounting, shaft visible

FASCO

FASCO D895 Condenser Fan Motor 1/8 HP 200-230V 650 RPM 48 Frame CW Rotation

SKU CH-X8M6-ETNXX

A permanent-split-capacitor condenser fan motor rated 1/8 HP at 650 RPM for 200-230V single-phase systems

  • Delivers 1/8 HP for condenser cooling
  • Runs at 650 RPM with permanent split capacitor design
  • Operates on 200-230V AC single-phase power
  • Fits 48 frame stud-mount replacements
  • Auto thermal protection with Class B insulation

Motor Design & Intended Use

The FASCO D895 is a single-phase permanent split capacitor condenser fan motor rated at 1/8 HP. It operates on 200-230V AC at 60 Hz and is designed as an OEM replacement for Trane equipment, specifically matching part number 5KCP39BGR426S. This unit suits technicians servicing compatible HVAC condensers that require a 48 frame motor with clockwise shaft rotation.

Sustained Load Behaviour

The motor carries a service factor of 1 and a full-load current of .80 amps at a nameplate speed of 650 RPM. Its totally enclosed air-over enclosure relies on the application airflow for cooling during continuous operation. Thermal protection is automatic, and the insulation is rated Class B for a maximum ambient temperature of 40 degrees C. The motor is not usable at 208V but is confirmed for 200V supply.

Installation Notes & Common Issues

Mounting is via stud pattern on the 48 frame, and the shaft turns clockwise when viewed from the lead end. Verify that the replacement condenser provides the correct airflow path for the air-over design; insufficient airflow will cause overheating despite the automatic thermal cutout. Confirm the supply voltage is within 200-230V and not 208V, as the motor is not rated for that voltage. A permanent split capacitor (not supplied) must be matched to the motor specifications for proper starting and running.

Highlights

  • Delivers 1/8 HP for condenser cooling
  • Runs at 650 RPM with permanent split capacitor design
  • Operates on 200-230V AC single-phase power
  • Fits 48 frame stud-mount replacements
  • Auto thermal protection with Class B insulation

Specifications

BrandFASCO

Questions about this item

How much heat and power does the 1/8 HP motor draw when it runs continuously at 650 RPM?

The motor draws 0.80 full-load amps at 200-230 V AC, has a 1.0 service factor and Class B insulation rated for a maximum ambient temperature of 40 °C.

What voltage supply and mounting studs must already be in place for this 48-frame motor to install correctly?

A 200-230 V AC single-phase 60 Hz supply is required; the motor uses stud mounting and is not usable at 208 V.

Will this CW-rotation motor directly replace a Trane 5KCP39BGR426S unit without wiring or shaft changes?

Yes, it is listed as an OEM replacement for that Trane model and matches the 48-frame, CW rotation and stud-mount configuration.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.