We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
FASCO D1165 condenser fan motor steel frame open enclosure 3.3 in frame

FASCO

FASCO D1165 condenser fan motor 1/20 HP 115V 1550 rpm equipment

SKU CH-29P1-4QTHX

Condenser fan motor runs at 1550 rpm with 1/20 HP output on 115 V AC single-phase power

  • MaterialHAWA
  • Weight3.9
  • 1/20 HP motor drives condenser fans efficiently
  • 115 V AC single-phase power suits standard supplies
  • 1550 rpm nameplate speed delivers consistent airflow
  • 3 inch frame fits OEM Thermador Trade Wind replacements
  • Auto thermal protection and Class B insulation enhance reliability

Motor basics

The FASCO D1165 is a single-phase shaded-pole condenser fan motor rated at 1/20 HP and 1550 rpm on 115 V AC. It draws 1.90 full-load amps at 60 Hz and uses a 3.3 in steel frame with open air-over enclosure. Auto thermal protection and Class B insulation support a maximum ambient temperature of 40 degrees C.

Fit and limits

This motor suits OEM replacements for Thermador Trade Wind equipment and matches part number 19-09-215. It is not usable at 200 V or 208 V, so installers working on multi-voltage systems must look elsewhere. The single-speed, CCWLE rotation and stud mounting also rule out applications needing reversible or multi-speed operation.

Installation notes

Mounting uses the integral stud pattern on the 3.3 in frame; verify the stud spacing matches the original bracket before securing. The open air-over design requires unobstructed airflow across the frame for cooling, so avoid tight enclosures. Confirm shaft rotation is CCWLE when viewed from the lead end to prevent incorrect fan direction.

Highlights

  • 1/20 HP motor drives condenser fans efficiently
  • 115 V AC single-phase power suits standard supplies
  • 1550 rpm nameplate speed delivers consistent airflow
  • 3 inch frame fits OEM Thermador Trade Wind replacements
  • Auto thermal protection and Class B insulation enhance reliability

Specifications

MaterialHAWA
Weight3.9
BrandFASCO

Questions about this item

What voltage supply do I need to run the FASCO D1165 motor?

The motor requires a 115 V AC, 60 Hz single-phase supply; it is not usable at 200 V or 208 V.

Will this motor fit the same 3.3 inch frame mounting as my old Thermador Trade Wind unit?

Yes, it is a direct OEM replacement for Thermador part 19-09-215 and uses the same 3.3 in frame with stud mounting.

How can I confirm the motor is rotating correctly after installation?

The shaft should turn counter-clockwise when viewed from the lead end (CCWLE) at the nameplate speed of 1550 rpm.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.