FASCO
FASCO D1132 Condenser Fan Motor 1/20 HP 1300/1500 RPM 208-230V
Replaces Heatcraft condenser fan motors with a 1/20 HP shaded-pole unit running at 1300/1500 RPM on 208-230V power
- OEM replacement for Heatcraft systems with Fasco 71639383 cross-reference
- Dual-speed operation at 1300/1500 RPM for flexible airflow
- Auto thermal protection and Class B insulation guard against overheating
- Rated for 208-230V single-phase supply with 1.07/0.96 A full-load draw
- Shaded-pole design delivers 1/20 hp in a compact 3.3 frame
FASCO D1132 Condenser Fan Motor
The FASCO D1132 is a new single-phase shaded-pole motor rated at 1/20 hp. It operates at 1300/1500 RPM on 208-230V AC power at 50/60 Hz. This unit serves as an OEM replacement for Heatcraft systems and matches Fasco Mfr. No. 71639383 and Heatcraft Mfr. No. 25300201.
Ideal for Heatcraft OEM Replacement
This motor suits technicians replacing a failed condenser fan motor in Heatcraft equipment where a 3.3 frame shaded-pole design is specified. It is not for installations requiring multi-speed operation or a different frame size. Builders needing variable speed control or a higher horsepower rating should look at alternative motor types.
Direct OEM Fit Simplifies Installation
The motor matches the original Heatcraft 25300201 and Fasco 71639383 part numbers for a direct swap. Auto thermal protection and Class B insulation are integrated features that support reliable operation up to 40 Degrees C ambient temperature. No additional accessories or software are bundled with this replacement motor.
Highlights
- OEM replacement for Heatcraft systems with Fasco 71639383 cross-reference
- Dual-speed operation at 1300/1500 RPM for flexible airflow
- Auto thermal protection and Class B insulation guard against overheating
- Rated for 208-230V single-phase supply with 1.07/0.96 A full-load draw
- Shaded-pole design delivers 1/20 hp in a compact 3.3 frame
Specifications
| Brand | FASCO |
|---|
Questions about this item
What voltage supply must my system provide for the FASCO D1132 motor?
The motor is rated for 208-230V AC and is usable at 208V but not at 200V.
Will this replacement motor match the shaft rotation of my existing Heatcraft unit?
Yes, the motor shaft rotation is CWSE, matching the original Heatcraft 25300201 specification.
How can I confirm the motor is running at the correct speed after installation?
The nameplate shows 1300/1500 RPM; measure the shaft speed under load to verify it falls within this range.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
