FASCO
FASCO A064 Induced Draft Furnace Blower 115V AC 0.65A 3150 RPM
Induced draft furnace blower for natural-gas furnaces running at 115V AC, 0.65A, 3150 RPM with shaded-pole motor
- Shaded pole motor runs quietly at 3150 RPM
- 115V AC / 0.65A matches standard furnace wiring
- Replaces Heil Quaker models 610672, 7021-5043, 70217102
- Class B insulation handles sustained heat cycles
- 50/60 Hz operation suits both domestic frequencies
FASCO A064 Induced Draft Blower
The FASCO A064 is a replacement induced draft blower designed for natural gas furnaces. It operates on 115V AC single-phase power at 50/60 Hz and draws 0.65 A. The shaded-pole motor carries a Class B insulation rating. It fits Heil Quaker equipment and replaces manufacturer numbers 610672, 7021-5043, and 70217102.
Verify furnace specifications first
Confirm the appliance uses natural gas and requires an induced draft blower with a 4 5/8 in inlet diameter. Ensure the nameplate voltage matches 115V AC and the wiring uses wire leads. Check that the original motor speed rating aligns with a maximum of 3,150 RPM for the motor and 3,400 RPM for the fan. Cross-reference the Heil Quaker model and replacement numbers listed.
Sustained operation within rated limits
Under continuous heating cycles the motor runs at its rated 0.65 A current with Class B insulation handling the thermal load. The shaded-pole design maintains the stated maximum speeds of 3,150 RPM for the motor and 3,400 RPM for the fan without short-term boost. Performance stays consistent as long as the supply voltage remains at 115V AC and the furnace draft conditions stay within design parameters.
Highlights
- Shaded pole motor runs quietly at 3150 RPM
- 115V AC / 0.65A matches standard furnace wiring
- Replaces Heil Quaker models 610672, 7021-5043, 70217102
- Class B insulation handles sustained heat cycles
- 50/60 Hz operation suits both domestic frequencies
Specifications
| Brand | FASCO |
|---|
Questions about this item
What comes with the FASCO A064 blower and what must I purchase separately?
The unit ships as the induced draft blower with wire leads for electrical connection; mounting hardware, gaskets and any venting components are not included and must be sourced separately.
Which specifications should I match when choosing this blower for my furnace?
Verify the nameplate voltage of 115V AC, current draw of .65 A, frequency of 50/60 Hz, shaded-pole motor type, Class B insulation, maximum fan speed of 400 RPM and maximum motor speed of 3150 RPM against your furnace requirements.
What does the 3150 RPM motor speed mean once the blower is installed in my gas furnace?
The 3150 RPM maximum motor speed drives the induced draft fan up to 400 RPM, providing the combustion airflow needed for natural-gas furnaces such as Heil Quaker models replaced by part numbers 610672, 7021-5043 and 70217102.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
