Fans
Fans W2E143-AA15-01Motor 115V 24/26W industrial cooling fan
Axial fan moves 380 m³/h at 2800 rpm with 172 mm blade diameter on 115 V supply
- Reliable airflow with 380 m³/h axial performance
- Low 0.25 A draw at 115 V supply
- Compact 172 × 51 mm blade fits tight spaces
- Quiet 2800 rpm operation for noise-sensitive areas
- Durable ebm-papst German engineering for industrial use
Application fit
The W2E143-AA15-01Motor is an axial fan built for industrial cooling where installation depth is limited. It suits equipment builders who need reliable air exchange in medical devices, rail vehicles, drive enclosures, hotel systems or electronic cabinets. Buyers who require centrifugal pressure or a different voltage will need another model.
Capacity and headroom
At 115 V the motor draws 0.25 A and delivers 24 W or 26 W depending on load, spinning at 2800 r/min to move 380 m³/h of air. The 172 mm by 51 mm blade diameter keeps the profile shallow while maintaining flow through heat exchangers. The unit runs out of headroom when static pressure demands exceed what an axial design can develop.
Upgrade path
This fan replaces older axial units of the same frame size that lack the GreenTech EC efficiency gains. The jump is worth it when lower noise, reduced power draw and intelligent speed control are required for continuous operation in supervised environments. It does not fit mounts designed for larger diameters or different bolt patterns.
Highlights
- Reliable airflow with 380 m³/h axial performance
- Low 0.25 A draw at 115 V supply
- Compact 172 × 51 mm blade fits tight spaces
- Quiet 2800 rpm operation for noise-sensitive areas
- Durable ebm-papst German engineering for industrial use
Specifications
No published specifications for this item yet.
Questions about this item
Will the 172 mm blade diameter and 115 V rating let this fan mount in the same cut-out as my existing 172 mm 115 V unit?
Yes, the 172 mm blade diameter and 115 V supply match common legacy cut-outs, so the fan can replace an older unit with the same dimensions and voltage.
How can I verify the fan is running at the rated 2800 r/min after installation?
Measure the rotational speed with a tachometer; it should read approximately 2800 r/min when powered at 115 V.
Does the box include mounting hardware or a power cord, or must I source them separately?
The scope of application lists only the fan unit; mounting brackets and a power cord are not included and must be purchased separately.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
