Fans
Fans W1G180-AB31-01 Axial Fan 24V 4.30A 93W 4550rpm
A 24 V axial fan delivering 93 W at 4550 rpm with 380 Pa maximum back pressure
- High airflow up to 35000 m³/h for demanding cooling
- 24 V nominal voltage with 16 to 28 VDC operating range
- 4550 rpm speed delivers 93 W power consumption
- All-metal construction with ball bearings for long service life
- Polarity and locked-rotor protection plus reverse installation option
24 V DC Axial Fan for Industrial Cooling
The Fans W1G180-AB31-01 is an ebm-papst original DC ball-bearing fan built for high air-performance applications. It runs on a 24 V nominal supply with a 16 to 28 V range and delivers 93 W power consumption at 4.3 A current draw. The all-metal construction supports continuous operation from -25 °C to 60 °C ambient temperature.
Suitable for Inverter and Forced-Air Systems
This unit suits engineers integrating cooling into ABB inverters, HVAC equipment or similar forced-air designs where 100 % speed control via analogue or serial interface is required. Buyers who need a different voltage rating, a lower acoustic profile or a non-metallic housing should look at alternative fan families.
4550 rpm Airflow with 380 Pa Pressure Headroom
At 4550 rpm the fan moves up to 35000 m³/h while developing a maximum back pressure of 380 Pa, giving ample headroom for ducted enclosures and heat-exchanger stacks. The curve flattens as static pressure approaches the 380 Pa limit, so systems demanding higher static resistance will require a larger-diameter or higher-speed solution.
Highlights
- High airflow up to 35000 m³/h for demanding cooling
- 24 V nominal voltage with 16 to 28 VDC operating range
- 4550 rpm speed delivers 93 W power consumption
- All-metal construction with ball bearings for long service life
- Polarity and locked-rotor protection plus reverse installation option
Specifications
No published specifications for this item yet.
Questions about this item
What voltage range must my power supply deliver for the W1G180-AB31-01 fan?
The fan operates from 16 VDC to 28 VDC, with a nominal 24 VDC input.
Will the fan fit the mounting pattern of the older M1G074-BF motor housing?
The unit uses the ebm-papst standard square and round frame that matches the M1G074-BF footprint.
How can I confirm the fan is running at its rated 4550 rpm after installation?
Measure the tachometer output or monitor the 4.30 A current draw at 24 VDC to verify 4550 rpm operation.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
