Fans
Fans S4D350-AP08-36 350 mm 380 V industrial cooling fan
A 350 mm industrial axial fan moves up to 35,000 m³/h at 380 V with CE approval
- 350 mm diameter fits tight spaces
- 380 V three-phase motor runs directly from industrial supply
- 1370 rpm at 50 Hz delivers 35000 m³/h airflow
- 170 W power draw keeps operating costs low
- CE approved for European safety compliance
Industrial Axial Fan 350 mm 380 V
This 350 mm external-rotor axial fan operates on 380 V three-phase power at 50 or 60 Hz. It suits industrial HVAC, heat-exchanger and enclosure-cooling systems that need high airflow in a shallow mounting depth. The unit is new and carries CE approval.
Replaces Larger Belt-Drive Units
The compact motor design removes the need for belts, pulleys and separate motor mounts, cutting installation depth and maintenance. The jump is worth it when an existing belt-drive fan cannot fit the available space or when service intervals must be lengthened.
Fits Tight Enclosures and Ducted Systems
The fan delivers up to 35000 m³/h against 90 Pa back pressure, so it works in ducted heat-exchanger arrays without large plenums. It needs a three-phase 380 V supply and analog or serial speed-control wiring; it frees up the floor space a belt-drive assembly would occupy.
Highlights
- 350 mm diameter fits tight spaces
- 380 V three-phase motor runs directly from industrial supply
- 1370 rpm at 50 Hz delivers 35000 m³/h airflow
- 170 W power draw keeps operating costs low
- CE approved for European safety compliance
Specifications
No published specifications for this item yet.
Questions about this item
What mounting dimensions and bolt pattern suit the 350 mm fan housing?
The fan uses a 350 mm outer-rotor axial design with a compact steel-plate frame; verify the exact bolt-circle diameter against the equipment cutout before ordering.
How is the three-phase 380 V Y-connection wired, and which step is often missed?
Wire the motor in star (Y) for 400 V 50/60 Hz supply, confirm rotation direction matches the airflow arrow, and do not forget to connect the protective earth terminal.
Which components typically need replacement after extended operation?
The external-rotor motor bearings and the analog/serial speed-control interface are the primary wear items; plan inspection intervals based on the 65 °C maximum ambient rating.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
