Fans
Fans S3G350-AA58-01 230V 1.2A IP68 150W blower
IP68-rated 230 V axial blower delivers 150 W cooling from −25 °C to 60 °C
- IP68 rating protects against dust and water ingress
- 150 W motor delivers strong airflow for cooling
- 230 V 1.2 A single-phase suits standard mains supply
- 25 °C to 60 °C operating range handles harsh environments
- Thermal overload protector prevents motor damage during faults
Compact 230 V axial blower
This single-phase ebm-papst blower runs on 230 VAC (200 to 277 V range) at 50/60 Hz, drawing 1.2 A and 150 W at 1 540 rpm. The motor is fully integrated into the fan housing, saving space in tight enclosures. It is rated IP68 for waterproof operation and operates from -25 °C to 60 °C. Braided steel blades with black coating deliver strong airflow.
Check voltage, phase and mounting
Verify that your supply is single-phase AC within the 200 to 277 V window and that the circuit can provide 1.2 A continuously. Confirm the blower’s outer-rotor dimensions match your cut-out and that the mounting pattern aligns with your chassis. Ensure the ambient temperature at the install site stays between -25 °C and 60 °C. The built-in thermal overload protector handles phase-failure and overload events.
Fits tight enclosures, frees layout space
Because the motor sits inside the rotor, the unit needs no external motor housing, freeing internal volume for other components. The IP68 seal allows placement in wet or dusty zones without extra enclosures. Braided blades maintain airflow against moderate back-pressure. Thermal protection keeps the blower running through electrical faults, reducing downtime in HVAC and industrial cabinets.
Highlights
- IP68 rating protects against dust and water ingress
- 150 W motor delivers strong airflow for cooling
- 230 V 1.2 A single-phase suits standard mains supply
- 25 °C to 60 °C operating range handles harsh environments
- Thermal overload protector prevents motor damage during faults
Specifications
No published specifications for this item yet.
Questions about this item
Does the S3G350-AA58-01 ship with mounting hardware or a power cable, or do I need to buy them separately?
The listing describes the blower unit only; mounting brackets, wiring harnesses and mating connectors are not included and must be sourced separately.
The supplier title mentions 230 V and 150 W — are there alternative voltage or power versions of this blower I should consider?
Only the 230 VAC, 150 W, 1.2 A variant with IP68 protection is offered under this model number; no other voltage or power ratings are listed.
With a rated speed of 1540 rpm and 150 W draw, what airflow can I expect once the fan is installed in a ducted system?
The supplier data gives speed and power but no airflow figure; actual delivery depends on duct resistance, so plan for system-level testing to confirm performance.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
