Fans
Fans S2E250-BM06-01 axial flow blower
Axial flow blower with integrated motor runs on 230 VAC single-phase at 50/60 Hz, delivering 115–150 W with impedance protection and thermal overload safety
- Runs on standard 230 VAC single-phase supply
- Operates at both 50 Hz and 60 Hz mains
- Thermal overload protector guards motor during faults
- Black-coated steel blades and rotor resist corrosion
- CE approved for European safety compliance
Industrial HVAC Blower
The Fans S2E250-BM06-01 is an axial flow blower built for continuous ventilation in HVAC and industrial equipment. Its integrated motor design saves installation space while delivering reliable airflow for cooling or exhaust duties. The unit is CE approved and arrives in new condition for immediate deployment.
Sustained Load Performance
At 50 Hz the blower runs at 2450 rpm drawing 0.51 A and 115 W, while at 60 Hz it reaches 2600 rpm with 0.66 A and 150 W. Maximum back pressure is rated at 120 Pa and 85 Pa respectively across the two frequencies. Thermal overload protection guards the motor during extended operation or phase-failure events.
Pre-Installation Checks
Verify that your supply matches 230 VAC single-phase at either 50 Hz or 60 Hz and that a 3 µF 400 VDB run capacitor is fitted. Confirm the operating environment stays between -25 °C and 65 °C ambient. Ensure the ducting or housing can accommodate the measured back-pressure limits without restricting flow.
Highlights
- Runs on standard 230 VAC single-phase supply
- Operates at both 50 Hz and 60 Hz mains
- Thermal overload protector guards motor during faults
- Black-coated steel blades and rotor resist corrosion
- CE approved for European safety compliance
Specifications
No published specifications for this item yet.
Questions about this item
How loud and hot does the 230 VAC motor run at 2450 rpm continuously?
At 2450 rpm it draws 0.51 A and 115 W, with a maximum ambient temperature of 65 °C and built-in thermal overload protection.
Which capacitor must I already have to install this blower?
A 3 µF capacitor rated at 400 VDB to the S0 (CE) standard is required for operation.
Will the 230 VAC single-phase supply in my existing cabinet work with this fan?
Yes, it runs on 230 VAC at 50 Hz or 60 Hz with a starting current of 0.88 A and impedance protection.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
