Fans
Fans R4D560-AW03-01 560mm Centrifugal Blower
Centrifugal blower with 560 mm impeller delivering up to 35000 m³/h airflow at 1365 min⁻¹, 2380 W three-phase motor for 230/400 VAC supplies, operating from -40 °C to 60 °C
- Delivers up to 35000 m³/h airflow for large purification systems
- Operates on 230 V or 400 V three-phase power at 50 Hz
- External rotor motor design provides compact construction and forced electronic cooling
- Speed fully controllable up to 100 % via analogue signal
- Withstands ambient temperatures from -40 °C to 60 °C for harsh environments
560mm Centrifugal Blower for Industrial HVAC
The Fans R4D560-AW03-01 is a new centrifugal blower with a 560mm diameter designed for large purification and air-conditioning systems. It uses an external rotor motor for compact integration and forced electronic cooling. Air flow reaches up to 35000m3/h for demanding ventilation requirements.
Suits three-phase 230/400VAC installations only
This blower suits facilities running three-phase 230VAC or 400VAC at 50Hz with Y-connection wiring. It is not for single-phase residential supplies or DC voltage systems. Buyers needing variable speed without analogue control or lower starting current should look at something else.
Dual-voltage motor runs at 1365 RPM on both 230V
The M4D138-LA motor delivers 1365 min-1 at 2380W whether connected to 230VAC drawing 8.65A or 400VAC drawing 5.0A. Starting current reaches 47A at 230V and 27A at 400V. Maximum safe operating speed is 1640 min-1 across the -40°C to 60°C ambient range.
Highlights
- Delivers up to 35000 m³/h airflow for large purification systems
- Operates on 230 V or 400 V three-phase power at 50 Hz
- External rotor motor design provides compact construction and forced electronic cooling
- Speed fully controllable up to 100 % via analogue signal
- Withstands ambient temperatures from -40 °C to 60 °C for harsh environments
Specifications
No published specifications for this item yet.
Questions about this item
What duct or housing diameter does the 560 mm impeller require?
The 560 mm impeller is a free-wheeling backward-curved design that does not require a scroll housing; mount it with adequate clearance for unrestricted airflow.
How do I wire the three-phase motor for 230 VAC or 400 VAC at 50 Hz?
Connect the motor in the Y configuration shown on the nameplate; 230 VAC draws 8.65 A and 400 VAC draws 5.0 A, both at 1365 min-1.
When should I expect to replace the bearings given the -40 °C to 60 °C operating range?
The external-rotor motor is cooled by the airstream; bearing life varies with load and environment, so inspect at regular service intervals rather than a fixed schedule.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
