Fans
Fans R3G595-AB23-08Motor 400V 2930W 595mm 1400rpm centrifugal blower
A 595 mm centrifugal blower with a 400 V motor delivering 2930 W at 1400 rpm for industrial and commercial cooling
- High motor power drives demanding airflow
- 400 V supply suits industrial three-phase systems
- 595 mm blade diameter moves large air volumes
- 1400 rpm speed balances output and noise
- Wide application range covers medical, rail and industrial cooling
Precision centrifugal blower
The Fans R3G595-AB23-08Motor is a new 400V centrifugal blower rated at 2930W with a 595mm blade diameter running at 1400rpm. It draws 4.5A and is built by ebmpapst for industrial and commercial air-moving duties.
Suited for fixed HVAC and cooling installations
Engineers specifying precision air-conditioning, medical equipment cooling, rail-vehicle drive cooling or industrial cleaning systems will match the voltage, power and airflow envelope. Buyers needing a lower-voltage unit, a smaller impeller or a different mounting pattern should look elsewhere.
Integrates into ducted systems
The blower fits into 400V three-phase supplies and existing ductwork designed for a 595mm diameter housing. Its 2930W motor delivers the required pressure rise without additional drive electronics, freeing panel space for filters or control gear.
Highlights
- High motor power drives demanding airflow
- 400 V supply suits industrial three-phase systems
- 595 mm blade diameter moves large air volumes
- 1400 rpm speed balances output and noise
- Wide application range covers medical, rail and industrial cooling
Specifications
No published specifications for this item yet.
Questions about this item
What voltage supply and current capacity must the installation provide for the 400V 2930W motor?
The motor runs on a 400 V three-phase supply and draws 4.5 A at full load.
Can the 595 mm blade diameter and 1400 rpm speed match the airflow of an older 350 mm 1620 rpm unit in the same duct?
The larger 595 mm blade at 1400 rpm moves more air at lower tip speed, so duct resistance and mounting pattern must be rechecked.
How do I verify the blower is delivering its rated 2930 W output after wiring?
Measure the three-phase current; it should read close to 4.5 A per phase when the system reaches design pressure.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
