Fans
Fans R3G560-RB32-10 400 V 2900 W 1650 rpm blower
A 400 V centrifugal blower delivering 2900 W at 1650 rpm for clean-air HVAC systems
- 2900 W motor delivers strong airflow for demanding ventilation
- 1650 rpm at 400 V three-phase for consistent high-speed operation
- Speed adjustable from 0 to 100 % via analog or serial interface
- Operates reliably from -25 °C to 50 °C ambient temperature
- Compact external-rotor design integrates motor inside impeller for efficient cooling
Industrial centrifugal blower
This three-phase centrifugal blower delivers 2,900 watts of power at 1,650 rpm from a 400 VAC supply. It suits clean-air handling in commercial HVAC, filtration cabinets and industrial ventilation where a compact external-rotor motor is required.
Upgrade from belt-drive or scroll-housed units
Direct-drive construction removes belts, pulleys and separate scroll housings, cutting maintenance and installation space. The jump is worth it when you need 100 % analogue or serial speed control, simplified commissioning and an operating envelope from -25 °C to 50 °C.
Verify three-phase 380–480 VAC supply
Confirm your site provides three-phase power within the 380 V to 480 V range at 50 or 60 Hz and that 4.43 A per phase is available. Ensure the system static pressure matches the fan curve so the 35,000 m³/h maximum flow can be utilised without overload.
Highlights
- 2900 W motor delivers strong airflow for demanding ventilation
- 1650 rpm at 400 V three-phase for consistent high-speed operation
- Speed adjustable from 0 to 100 % via analog or serial interface
- Operates reliably from -25 °C to 50 °C ambient temperature
- Compact external-rotor design integrates motor inside impeller for efficient cooling
Specifications
No published specifications for this item yet.
Questions about this item
What voltage supply and current rating does the R3G560-RB32-10 blower require?
It runs on three-phase 400 VAC within a 380–480 V range and draws 4.43 A at full load.
How is the blower controlled for speed, and what wiring mistake should be avoided?
Speed is set via an analog or serial interface; do not apply line voltage directly to the control pins.
What is the expected bearing life at the maximum ambient temperature?
The motor is rated for continuous operation up to 50 °C ambient; bearing replacement intervals depend on actual running hours and load.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
