Fans
Fans R2E220-AA40-71 220x71mm 230V 0.38/0.40A industrial cooling fan
Centrifugal blower moves air at 2600-2700 rpm with 85-90 W draw on 230 V 50/60 Hz power
- Runs at 2600 rpm on 50 Hz or 2700 rpm on 60 Hz
- Draws only 0.38 A at 50 Hz and 0.40 A at 60 Hz
- Consumes 85 W at 50 Hz and 90 W at 60 Hz
- Operates from -25 °C to 40 °C ambient temperature
- Centrifugal blower design vents air outward by impeller kinetic energy
What this fan is and who it serves
The Fans R2E220-AA40-71 is a new 230 VAC single-phase centrifugal blower built for industrial HVAC and machinery cooling. It targets engineers and maintenance teams who need a compact, original ebm-papst unit for continuous airflow in enclosures, ducting or process equipment.
Capacity and headroom at 50 and 60 Hz
At 50 Hz the motor draws 0.38 A and 85 W while spinning at 2600 rpm; at 60 Hz it draws 0.40 A and 90 W at 2700 rpm. The design covers ambient temperatures from -25 °C to 40 °C with zero minimum back-pressure, so it handles open exhaust or ducted runs until the temperature ceiling is reached.
Build quality and daily mounting implications
CE-approved construction includes a 3 µF (50 Hz) or 2 µF (60 Hz) run capacitor rated at 400 V to S0 standard, and the blower housing is offered in multiple IP ratings up to IP68 for harsh environments. Starting current peaks at 0.54 A (50 Hz) and 0.52 A (60 Hz), so the supply circuit must tolerate that brief inrush without nuisance tripping.
Highlights
- Runs at 2600 rpm on 50 Hz or 2700 rpm on 60 Hz
- Draws only 0.38 A at 50 Hz and 0.40 A at 60 Hz
- Consumes 85 W at 50 Hz and 90 W at 60 Hz
- Operates from -25 °C to 40 °C ambient temperature
- Centrifugal blower design vents air outward by impeller kinetic energy
Specifications
No published specifications for this item yet.
Questions about this item
Will this 230 V 0.38 A fan run on a 50 Hz circuit alongside older 220 V equipment?
Yes, it is rated for 230 V at 50 Hz drawing 0.38 A, matching legacy 220 V nominal supplies.
How can I confirm the impeller is spinning at the rated 2600 rpm after installation?
Measure the rotational speed with a tachometer; it should read approximately 2600 rpm at 50 Hz or 2700 rpm at 60 Hz.
Does the package include the required 3 µF 400 V capacitor or must I source it separately?
The supplier data lists a 3 µF 400 V capacitor as part of the motor specification; verify the box contents on arrival.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
