Fans
Fans G2E120-AR38-01 Centrifugal Blower 120mm 230VAC 152CFM
A 120 mm centrifugal blower delivering 152 CFM at 230 VAC with IP44 protection and thermal contacts
- High airflow 152 CFM for effective cooling
- Single-phase 230 VAC operation suits standard mains power
- Variable speed control via external voltage reduction
- IP44 rating protects against splashing water and dust
- Thermal contacts in windings provide overheat protection
Centrifugal Blower 120mm 230VAC
The G2E120-AR38-01 is a single-inlet centrifugal blower built for 230 VAC mains supply. It delivers 152 CFM airflow for HVAC, industrial cooling and ventilation systems that need directed pressure.
IP44 rating and 50°C to 60°C ambient range
The motor housing meets IP44 protection against splashing water and solid particles. Operation is rated from -25 °C up to 50 °C at 50 Hz and 60 °C at 60 Hz, limiting use in environments that exceed these temperatures.
Flange mounting with external capacitor required
A sturdy flange simplifies mechanical fixing, but the motor needs a 22 µF 450 VDB run capacitor (not included) and thermal-contact wiring for overload protection. Speed control demands a separate variable-voltage controller.
Highlights
- High airflow 152 CFM for effective cooling
- Single-phase 230 VAC operation suits standard mains power
- Variable speed control via external voltage reduction
- IP44 rating protects against splashing water and dust
- Thermal contacts in windings provide overheat protection
Specifications
No published specifications for this item yet.
Questions about this item
Should I choose the 50 Hz or 60 Hz rating for my 230 VAC supply?
The blower runs at 2500 rpm and draws 83 W at 50 Hz, or 2600 rpm and 110 W at 60 Hz; match the rating to your local mains frequency.
What does the 152 CFM airflow mean once the blower is installed in a duct?
152 CFM is the free-air volume; actual flow will drop as duct static pressure rises, but the motor maintains 2500 rpm at 50 Hz up to its maximum back-pressure limit.
How does the IP 44 rating and single-phase 230 VAC interface limit where I can install this blower?
IP 44 protects against splashing water and solid objects over 1 mm, so the unit suits indoor or sheltered outdoor HVAC ducts; it connects directly to 230 VAC single-phase mains with the required 22 µF capacitor.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
