Fans
Fans A6D910-AA01-01Motor blower 380V 5.15A 2480W 910mm 890rpm 21770m³/h
A 380 V axial blower delivering 21 770 m³/h airflow at 890 rpm with a 910 mm impeller and 2 480 W motor
- High airflow of 21770 m³/h for large-space ventilation
- 380 V three-phase supply suits industrial power networks
- 2480 W motor delivers strong cooling at 890 rpm
- 910 mm blade diameter moves high volume efficiently
- New condition ensures full rated performance from installation
Industrial axial blower for high-volume cooling
The Fans A6D910-AA01-01Motor is a three-phase axial blower rated at 380 V and 5.15 A. It delivers 21770 m³/h airflow at 890 rpm from a 910 mm diameter rotor. The unit suits medical equipment, rail vehicles, drive cooling, hotel plant, industrial cleaning, electronic enclosures, new-energy vehicles and supermarket refrigeration where continuous high-volume air movement is required.
Replaces worn or undersized axial fans in 910 mm
Facilities running older 910 mm blowers that no longer meet airflow targets can install this 2480 W motor as a direct swap. The upgrade is justified when maintenance logs show rising bearing noise, reduced static pressure or motor overheating under sustained load. It is not for installations that require centrifugal pressure curves or variable-speed EC control.
Bolt-in mounting with standard flange pattern
The outer-rotor design fits existing 910 mm bolt circles so mechanical installation is straightforward. Electrical connection must match 380 V three-phase supply with appropriate overload protection sized for 5.15 A full-load current. Common issues are incorrect phase rotation causing reverse airflow and insufficient duct clearance leading to motor stall.
Highlights
- High airflow of 21770 m³/h for large-space ventilation
- 380 V three-phase supply suits industrial power networks
- 2480 W motor delivers strong cooling at 890 rpm
- 910 mm blade diameter moves high volume efficiently
- New condition ensures full rated performance from installation
Specifications
No published specifications for this item yet.
Questions about this item
What blade diameter and motor power must the mounting frame accommodate for this 910 mm axial fan?
The fan has a 910 mm blade diameter and a 2480 W motor, so the frame and clearances must be sized for that rotor span and power rating.
How is the three-phase 380 V supply connected, and what wiring mistake causes reverse rotation?
Connect the three phases to the motor terminals in the correct sequence; swapping any two phases reverses the 890 rpm rotation direction.
When should the bearings be inspected given the 21770 m³/h airflow at 890 rpm?
Schedule bearing inspection at the intervals recommended by ebm-papst for continuous 890 rpm operation, as high airflow loads accelerate wear.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
