Fans
Fans 6SY7010-7AA02 Siemens converter fan 280mm 230VAC 890W
A 280 mm centrifugal fan delivering 2565 m³/h at 230 VAC with 890 W input and 81 dB(A) noise
- High airflow 2565 m3/h for efficient cooling
- 890 W input power handles demanding converter loads
- IP10 protection and galvanised steel construction resist industrial wear
- 30 000 hour L10 life at 40 °C reduces replacement frequency
- 230 VAC single-phase supply fits standard industrial power
Siemens 6SY7010-7AA02 converter fan
The 6SY7010-7AA02 is an industrial centrifugal fan built for Siemens converter cooling. It runs on 230 VAC single-phase power with a voltage range of AC 190 to 245 V at 60 Hz. The galvanised-steel impeller measures 280 mm and is driven by an external-rotor motor rated at 890 W input power.
Suited for converter retrofit and maintenance
Engineers servicing existing Siemens drive cabinets will match the original airflow of 2 565 m³/h and static pressure up to 850 Pa. The IP10 protection level and 81 dB(A) noise index make it unsuitable for wash-down environments or noise-sensitive offices. Buyers who need higher ingress protection or quieter operation should look at alternative designs.
Fits standard converter ducting
The unit weighs 7.2 kg and connects via a TR64 plug with 400 mm flying leads, simplifying wiring inside the enclosure. A 12.0 µF / 450 V start capacitor is required for single-phase starting. Operating temperature spans -20 °C to +60 °C, and L10 life expectancy reaches 30 000 hours at 40 °C, reducing scheduled replacement intervals.
Highlights
- High airflow 2565 m3/h for efficient cooling
- 890 W input power handles demanding converter loads
- IP10 protection and galvanised steel construction resist industrial wear
- 30 000 hour L10 life at 40 °C reduces replacement frequency
- 230 VAC single-phase supply fits standard industrial power
Specifications
No published specifications for this item yet.
Questions about this item
What power supply is required for the 230VAC 890W motor?
The fan runs on single-phase 230VAC within a 190V to 245V range and draws 3.9 A at 890W input power.
Can the 280mm impeller and 2565 m3/h airflow replace an older 2740 rpm unit?
Yes, the motor speed is 2740 rpm at 60 Hz and the 280mm impeller delivers 2565 m3/h with wind pressure up to 850 Pa.
How do I confirm the fan is operating correctly after wiring the TR64 plug?
Verify the motor reaches 2740 rpm, airflow hits 2565 m3/h, noise stays near 81 dB(A) and the housing remains within the -20°C to 60°C range.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
